Specification sheet Wheel Loader Ref gehl-aws280-wheel-loader
Gehl AWS280
The Gehl AWS280 is a wheel loader with an operating weight of 7,055 lb (3,200.1 kg), a 39 hp engine, and a 1.44 yd³ (1.11 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,055lb
3,200.1kg
Engine power
39hp
29.09kW
Gross Power Bucket capacity
1.44yd³
1.11m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Gehl AWS280 sits at the compact end of its class:
- Operating weight 7,060 lb lighter than 91% (n=374)
- Engine power 39 hp less powerful than 90% (n=367)
- Bucket capacity 1.4 yd³ larger-bucket than 52% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 4TNV88 | |
| Gross Power | 39hp | 29.1kw |
| Power Measured @ | 2400rpm | |
| Max Torque | 105.5lb ft | 143Nm |
| Displacement | 133.7cu in | 2.2L |
| Torque Measured @ | 1600rpm |
02 Operational Specification
| Operating Weight | 7055lb | 3200.1kg |
|---|---|---|
| Fuel Capacity | 15.9gal | 60L |
| Hydraulic System Fluid Capacity | 17.2gal | 65L |
| Static Tipping Weight | 5181lb | 2350.1kg |
| Turning Radius | 11.2ft in | 3400mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 55amps | |
| Rear Axle Oscillation | 14degrees |
03 Transmission Specification
| Max Speed - Forward | 12.5mph | 20km/h |
|---|
04 Hydraulic System Specification
| Relief Valve Setting | 3400psi | 23442.2kPa |
|---|---|---|
| Pump Flow Capacity | 18.5gal/min | 70.1L/min |
| Pump Type | gear |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 7.55ft in | 2300mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.44yd3 | 1.11m3 |
| Breakout Force | 6137lb | 6137- |
06 Dimensions Dimensions
| Ground Clearance | 1.05ft in | 320mm |
|---|---|---|
| Length With Bucket On Ground | 15.13ft in | 4610mm |
| Width Over Tires | 4.93ft in | 1500mm |
| Height To Top Of Cab | 7.68ft in | 2340mm |
| Wheelbase | 5.75ft in | 1750mm |
| Hinge Pin - Max Height | 9.91ft in | 3020mm |
| Reach At Max Lift And Dump | 0.83ft in | 250mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.