Specification sheet Wheel Loader Ref gehl-avantage-wheel-loader
Gehl AVANTAGE
The Gehl AVANTAGE is a wheel loader with an operating weight of 2,050 lb (929.87 kg), and a 20 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
2,050lb
929.87kg
Engine power
20hp
14.92kW
Gross Power ◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Gehl AVANTAGE sits at the compact end of its class:
- Operating weight 2,050 lb lighter than 100% (n=374)
- Engine power 20 hp less powerful than 100% (n=367)
Not positioned on bucket capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Make | 2334 | |
| Gross Power | 20hp | 15kw |
02 Operational Specification
| Operating Weight | 2050lb | 929.9kg |
|---|---|---|
| Fuel Capacity | 4.9gal | 18.2L |
| Hydraulic System Fluid Capacity | 7.9gal | 29.9L |
| Engine Oil Fluid Capacity | 1.1gal | 3.8L |
| Static Tipping Weight | 1400lb | 635.1kg |
| Turning Radius | 6.6ft in | 2010mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 20amps |
03 Transmission Specification
| Max Speed - Forward | 6.9mph | 11km/h |
|---|
04 Hydraulic System Specification
| Relief Valve Setting | 2900psi | 19994.8kPa |
|---|---|---|
| Pump Flow Capacity | 10.6gal/min | 40L/min |
05 Bucket Dimensions
| Bucket Width | 3.42ft in | 1041mm |
|---|
06 Dimensions Dimensions
| Ground Clearance | 0.66ft in | 200mm |
|---|---|---|
| Width Over Tires | 3.34ft in | 1016mm |
| Height To Top Of Cab | 6.5ft in | 1980mm |
| Wheelbase | 3.58ft in | 1090mm |
| Hinge Pin - Max Height | 7.96ft in | 2425mm |
| Reach At Max Lift And Dump | 2.62ft in | 798mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.