Specification sheet Skid Steer Loader Ref gehl-7810e-skid-steer-loader
Gehl 7810E
The Gehl 7810E is a skid steer loader with an operating weight of 10,520 lb (4,771.8 kg), a 99 hp engine, a rated operating capacity of 3,850 lb (1,746.34 kg), and a 1.1 yd³ (0.8 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,520lb
4,771.8kg
Engine power
99hp
73.83kW
Net Power Rated operating capacity
3,850lb
1,746.34kg
Bucket capacity
1.1yd³
0.8m³
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Gehl 7810E sits at the heavy end of its class:
- Operating weight 10,520 lb heavier than 99% (n=334)
- Engine power 99 hp more powerful than 99% (n=335)
- Rated operating capacity 3,850 lb higher-rated than 99% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | B4.5T-99C | |
| Net Power | 99hp | 73.9kw |
| Power Measured @ | 2200rpm | |
| Displacement | 275cu in | 4.6L |
02 Operational Specification
| Operational Weight | 10520lb | 4771.8kg |
|---|---|---|
| Fuel Capacity | 30.5gal | 115.4L |
| Hydraulic System Fluid Capacity | 29.1gal | 110L |
| Max Speed | 7.5mph | 12km/h |
| Tire Size | 14.00x17.5 HD | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 40amps |
03 Loader Specification
| Operating Load Rating | 3850lb | 1746.4kg |
|---|---|---|
| Bucket Capacity | 1.1yd3 | 0.8m3 |
04 Hydraulic Specification
| Pump Flow Capacity | 29.1gal/min | 110L/min |
|---|
05 Dimensions Dimensions
| Length With Bucket | 13.42ft in | 4089mm |
|---|---|---|
| Width Over Tires | 6.75ft in | 2057mm |
| Ground Clearance | 9.1in | 231mm |
| Height To Top Of Cab | 6.75ft in | 2057mm |
| Wheelbase | 4.59ft in | 1397mm |
| Length W/O Bucket | 10.17ft in | 3099mm |
| Clearance At Max Lift And Dump | 8.92ft in | 2718mm |
| Reach At Max Lift And Dump | 38.19in | 970mm |
| Turning Radius From Center - Machine Rear | 40.26in | 1022.5mm |
| Turning Radius From Center - Inc Bucket | 50.85in | 1291.5mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.