Specification sheet Wheel Loader Ref gehl-540-wheel-loader
Gehl 540
The Gehl 540 is a wheel loader with an operating weight of 7,610.36 lb (3,452 kg), and a 47 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,610.36lb
3,452kg
Engine power
47hp
35.1kW
Net Power ◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Gehl 540 sits at the compact end of its class:
- Operating weight 7,610 lb lighter than 88% (n=374)
- Engine power 47 hp less powerful than 86% (n=367)
Not positioned on bucket capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 4TNV88 | |
| Net Power | 47hp | 35.1kw |
| Power Measured @ | 2800rpm | |
| Displacement | 133.6cu in | 2.2L |
02 Operational Specification
| Operating Weight | 7610.4lb | 3452kg |
|---|---|---|
| Fuel Capacity | 18gal | 68L |
| Hydraulic System Fluid Capacity | 11.1gal | 42L |
| Static Tipping Weight | 5136.8lb | 2330kg |
| Turning Radius | 10.6ft in | 3220mm |
| Operating Voltage | 12V | |
| Tire Size | 33x15.5-16.5 |
03 Transmission Specification
| Max Speed - Forward | 12.4mph | 20km/h |
|---|---|---|
| Max Speed - Reverse | 12.4mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 5940psi | 40954.9kPa |
|---|---|---|
| Pump Flow Capacity | 31gal/min | 117L/min |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 7.55ft in | 2301mm |
|---|---|---|
| Bucket Width | 5ft in | 1524mm |
06 Dimensions Dimensions
| Ground Clearance | 0.87ft in | 265mm |
|---|---|---|
| Length With Bucket On Ground | 14.8ft in | 4511mm |
| Width Over Tires | 4.53ft in | 1379mm |
| Height To Top Of Cab | 7.58ft in | 2310mm |
| Wheelbase | 5.71ft in | 1740mm |
| Hinge Pin - Max Height | 10.03ft in | 3056mm |
| Reach At Max Lift And Dump | 1.46ft in | 445mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.