Gehl 383Z
The Gehl 383Z is a mini excavator with an operating weight of 8,002 lb, a 28.8 hp engine, and a dig depth of 11.03 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Gehl 383Z sits above the median for its class:
- Operating weight 8,000 lb heavier than 73% (n=438)
- Engine power 29 hp more powerful than 69% (n=448)
- Dig depth 11 ft deeper-digging than 78% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 15.75ft in | 4,801mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Cutting Height | 15.29ft in | 4,660mm‖ — metric converted from the published imperial value |
| Max Loading Height | 11ft in | 3,353mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 8.76ft in | 2,670mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 11.03ft in | 3,362mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | Stick 5'5" (1650mm) |
02 Dimensions Specification
| Length Of Track On Ground | 5.59ft in | 1,704mm‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Clearance | 0.92ft in | 280mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 8.21ft in | 2,502mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 2.86ft in | 872mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 11.82in | 300.2mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Travel Speed | 2.85mph | 4.59km/h‖ — metric converted from the published imperial value |
| Number Of Carrier Rollers Per Side | 1 | |
| Number Of Track Rollers Per Side | 4 | |
| Drawbar Pull | 6614lb | 3,000kg‖ — metric converted from the published imperial value |
| Ground Pressure | 4.8psi | 33kpa‖ — metric converted from the published imperial value |
04 Engine Specification
| Engine Make | 2291 | |
|---|---|---|
| Engine Model | Yanmar 3TNV88-PNS, A TIER II | |
| Net Power | 28.8hp | 21.5kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2400rpm | |
| Displacement | 100cu in | 1,639cm3‖ — metric converted from the published imperial value |
05 Operational Specification
| Operating Weight | 8002lb | 3,630kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 11.7gal | 44.3l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 11.9gal | 45l‖ — metric converted from the published imperial value |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 71amps | |
| Hydraulic System Relief Valve Pressure | 3481psi | 24,001kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 31.2gal/min | 118l/min‖ — metric converted from the published imperial value |
06 Swing Mechanism Specification
| Swing Speed | 8.8rpm |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.