Specification sheet Skid Steer Loader Ref gehl-3635-skid-steer-loader
Gehl 3635
The Gehl 3635 is a skid steer loader with an operating weight of 4,400 lb (1,995.81 kg), a 36 hp engine, and a rated operating capacity of 1,050 lb (476.28 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
4,400lb
1,995.81kg
Engine power
36hp
26.85kW
Net Power Rated operating capacity
1,050lb
476.28kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Gehl 3635 sits at the compact end of its class:
- Operating weight 4,400 lb lighter than 90% (n=334)
- Engine power 36 hp less powerful than 91% (n=335)
- Rated operating capacity 1,050 lb lower-rated than 91% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2348 | |
|---|---|---|
| Engine Model | 3TNE88 diesel | |
| Net Power | 36hp | 26.9kw |
| Power Measured @ | 3000rpm | |
| Displacement | 100cu in | 1.7L |
02 Operational Specification
| Operational Weight | 4400lb | 1995.9kg |
|---|---|---|
| Fuel Capacity | 8.6gal | 32.2L |
| Hydraulic System Fluid Capacity | 8.1gal | 30.3L |
| Max Speed | 6.9mph | 11km/h |
| Tire Size | 8.50x15 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 40amps |
03 Loader Specification
| Operating Load Rating | 1050lb | 476.3kg |
|---|
04 Hydraulic Specification
| Pump Flow Capacity | 14.4gal/min | 54.6L/min |
|---|
05 Dimensions Dimensions
| Length With Bucket | 9.51ft in | 2896mm |
|---|---|---|
| Width Over Tires | 4.03ft in | 1226mm |
| Ground Clearance | 5.99in | 152mm |
| Height To Top Of Cab | 5.86ft in | 1784mm |
| Wheelbase | 2.87ft in | 874mm |
| Length W/O Bucket | 7.34ft in | 2235mm |
| Clearance At Max Lift And Dump | 7.05ft in | 2146mm |
| Reach At Max Lift And Dump | 22.76in | 578mm |
| Turning Radius From Center - Machine Rear | 26.46in | 672mm |
| Turning Radius From Center - Inc Bucket | 34.36in | 872.5mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.