Gehl 353
The Gehl 353 is a mini excavator with an operating weight of 7,715 lb, a 32 hp engine, and a dig depth of 10.59 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Gehl 353 sits above the median for its class:
- Operating weight 7,720 lb heavier than 66% (n=438)
- Engine power 32 hp more powerful than 74% (n=448)
- Dig depth 10.6 ft deeper-digging than 74% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Max Cutting Height | 16.11ft in | 4,910mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Loading Height | 11.88ft in | 3,621mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 17.3ft in | 5,273mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 7.3ft in | 2,225mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 10.59ft in | 3,228mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | Standard arm |
02 Boom/Stick Option (Hex) 2 Specification
| Max Cutting Height | 16.74ft in | 5,102mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Loading Height | 12.5ft in | 3,810mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 18.2ft in | 5,547mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 8.21ft in | 2,502mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 11.59ft in | 3,533mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 2 | Long arm |
03 Dimensions Specification
| Length Of Track On Ground | 5.25ft in | 1,600mm‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Clearance | 0.92ft in | 280mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 7.9ft in | 2,408mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 4.6ft in | 1,402mm‖ — metric converted from the published imperial value |
04 Undercarriage Specification
| Shoe Size | 12.01in | 305.1mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Travel Speed | 3mph | 5km/h‖ — metric converted from the published imperial value |
| Number Of Track Rollers Per Side | 4 | |
| Ground Pressure | 4.7psi | 32kpa‖ — metric converted from the published imperial value |
05 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2291 | |
| Engine Model | Yanmar 4TNV88-WNS, A TIER II | |
| Net Power | 32hp | 24kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2000rpm | |
| Displacement | 134.3cu in | 2,201cm3‖ — metric converted from the published imperial value |
06 Operational Specification
| Operating Weight | 7715lb | 3,499kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 13.8gal | 52.2l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 13.3gal | 50.3l‖ — metric converted from the published imperial value |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 88amps | |
| Hydraulic System Relief Valve Pressure | 3481psi | 24,001kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 28.2gal/min | 107l/min‖ — metric converted from the published imperial value |
07 Swing Mechanism Specification
| Swing Speed | 10rpm |
|---|
08 Buckets Specification
| Reference Bucket Capacity | 0.2yd3 |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.