Specification sheet Wheel Loader Ref gehl-340-wheel-loader
Gehl 340
The Gehl 340 is a wheel loader with an operating weight of 5,840.05 lb (2,649 kg), and a 35 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
5,840.05lb
2,649kg
Engine power
35hp
26.1kW
Net Power ◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Gehl 340 sits at the compact end of its class:
- Operating weight 5,840 lb lighter than 94% (n=374)
- Engine power 35 hp less powerful than 94% (n=367)
Not positioned on bucket capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 3TNV88 | |
| Net Power | 35hp | 26.1kw |
| Power Measured @ | 2800rpm | |
| Displacement | 100.2cu in | 1.7L |
02 Operational Specification
| Operating Weight | 5840.1lb | 2649kg |
|---|---|---|
| Fuel Capacity | 15.1gal | 57L |
| Hydraulic System Fluid Capacity | 6.9gal | 26L |
| Static Tipping Weight | 3794.2lb | 1721kg |
| Turning Radius | 9.9ft in | 3000mm |
| Operating Voltage | 12V | |
| Tire Size | 30.5x12.5-16.5 |
03 Transmission Specification
| Max Speed - Forward | 11.5mph | 18.6km/h |
|---|---|---|
| Max Speed - Reverse | 11.5mph | 18.6km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 5000psi | 34473.8kPa |
|---|---|---|
| Pump Flow Capacity | 20.9gal/min | 79L/min |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 7.04ft in | 2144mm |
|---|---|---|
| Bucket Width | 4.51ft in | 1372mm |
06 Dimensions Dimensions
| Ground Clearance | 0.81ft in | 244mm |
|---|---|---|
| Length With Bucket On Ground | 13.29ft in | 4049mm |
| Width Over Tires | 4.2ft in | 1280mm |
| Height To Top Of Cab | 7.41ft in | 2258mm |
| Wheelbase | 5.35ft in | 1628mm |
| Hinge Pin - Max Height | 9.37ft in | 2855mm |
| Reach At Max Lift And Dump | 1.03ft in | 312mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.