Gehl 283Z
The Gehl 283Z is a mini excavator with an operating weight of 5,886 lb, a 20.4 hp engine, and a dig depth of 9 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Gehl 283Z sits in the middle of its class:
- Operating weight 5,890 lb lighter than 60% (n=438)
- Engine power 20 hp less powerful than 65% (n=448)
- Dig depth 9 ft shallower-digging than 52% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Max Cutting Height | 14.11ft in | 4,301mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Loading Height | 9.76ft in | 2,975mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 15.36ft in | 4,682mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 7.07ft in | 2,155mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 9ft in | 2,743mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Length Of Track On Ground | 8.67ft in | 2,643mm‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Clearance | 0.91ft in | 277mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 7.92ft in | 2,414mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 2.5ft in | 762mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 11.82in | 300.2mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Travel Speed | 2.43mph | 3.91km/h‖ — metric converted from the published imperial value |
| Ground Pressure | 3.8psi | 26kpa‖ — metric converted from the published imperial value |
| Number Of Carrier Rollers Per Side | 1 | |
| Number Of Track Rollers Per Side | 3 | |
| Drawbar Pull | 5732lb | 2,600kg‖ — metric converted from the published imperial value |
04 Engine Specification
| Engine Make | 2348 | |
|---|---|---|
| Engine Model | 3TNV76 | |
| Net Power | 20.4hp | 15.2kw‖ — metric converted from the published imperial value |
| Displacement | 68cu in | 1,114cm3‖ — metric converted from the published imperial value |
05 Operational Specification
| Operating Weight | 5886lb | 2,670kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 9.6gal | 36l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 7.1gal | 27l‖ — metric converted from the published imperial value |
| Hydraulic System Relief Valve Pressure | 3263psi | 22,498kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 23.8gal/min | 90.1l/min‖ — metric converted from the published imperial value |
06 Swing Mechanism Specification
| Swing Speed | 10.3rpm |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.