Gehl 153
The Gehl 153 is a mini excavator with an operating weight of 3,759 lb, a 23.7 hp engine, and a dig depth of 7.17 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Gehl 153 sits below the median for its class:
- Operating weight 3,760 lb lighter than 80% (n=438)
- Engine power 24 hp less powerful than 52% (n=448)
- Dig depth 7.2 ft shallower-digging than 85% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Max Cutting Height | 11.49ft in | 3,502mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Loading Height | 8.35ft in | 2,545mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 4.89ft in | 1,490mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 7.17ft in | 2,185mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | Standard Arm |
02 Boom/Stick Option (Hex) 2 Specification
| Max Cutting Height | 13.14ft in | 4,005mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Loading Height | 9.55ft in | 2,911mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 5.48ft in | 1,670mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 7.49ft in | 2,283mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 2 | Long Arm |
03 Dimensions Specification
| Length Of Track On Ground | 4.02ft in | 1,225mm‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Clearance | 0.66ft in | 201mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 7.81ft in | 2,380mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 3.81ft in | 1,161mm‖ — metric converted from the published imperial value |
04 Undercarriage Specification
| Shoe Size | 9.06in | 230mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Travel Speed | 3.48mph | 5.6km/h‖ — metric converted from the published imperial value |
| Ground Pressure | 3.8psi | 26kpa‖ — metric converted from the published imperial value |
| Number Of Track Rollers Per Side | 3 |
05 Engine Specification
| Engine Make | 2348 | |
|---|---|---|
| Engine Model | 3TNE 74 | |
| Net Power | 23.7hp | 17.7kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2200rpm | |
| Displacement | 61.4cu in | 1,006cm3‖ — metric converted from the published imperial value |
06 Operational Specification
| Operating Weight | 3759lb | 1,705kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 6.4gal | 24l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 5.6gal | 21l‖ — metric converted from the published imperial value |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 45amps | |
| Hydraulic System Relief Valve Pressure | 2900psi | 19,995kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 18.7gal/min | 70.8l/min‖ — metric converted from the published imperial value |
07 Swing Mechanism Specification
| Swing Speed | 10rpm |
|---|
08 Buckets Specification
| Reference Bucket Capacity | 0.1yd3 |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.