Specification sheet Wheel Loader Ref gehl-140-wheel-loader
Gehl 140
The Gehl 140 is a wheel loader with an operating weight of 3,911.01 lb (1,774 kg), and a 23.3 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
3,911.01lb
1,774kg
Engine power
23.3hp
17.4kW
Net Power ◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Gehl 140 sits at the compact end of its class:
- Operating weight 3,910 lb lighter than 99% (n=374)
- Engine power 23 hp less powerful than 99% (n=367)
Not positioned on bucket capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 3TNV76 | |
| Net Power | 23.3hp | 17.4kw |
| Power Measured @ | 2800rpm | |
| Displacement | 567.5cu in | 9.3L |
| Bore | 4.5in | 114.3mm |
| Stroke | 5.9in | 149.9mm |
| Emissions | U.S. EPA Tier 4 Final/EU Stage IV | |
| Engine Model | Cat C9.3 | |
| Net Power - Eec 80/1269 | 250hp | 186.5kw |
| Maximum Torque | 827lb ft | 1121.3Nm |
| Net Power - Iso 9249/Sae J1349 | 250hp | 186.5kw |
| Base Power (1st Gear) - Net | 177hp | 132kw |
| Standard Capability | 109degrees | |
| Torque Rise - Iso 9294 | 40% |
02 Operational Specification
| Operating Weight | 3911.1lb | 1774kg |
|---|---|---|
| Fuel Capacity | 6.9gal | 26L |
| Hydraulic System Fluid Capacity | 9gal | 34L |
| Static Tipping Weight | 1929.1lb | 875kg |
| Turning Radius | 6.9ft in | 2101mm |
| Operating Voltage | 12V | |
| Tire Size | 27x10.5-15 |
03 Transmission Specification
| Max Speed - Forward | 10.5mph | 16.9km/h |
|---|---|---|
| Max Speed - Reverse | 10.5mph | 16.9km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 4640psi | 31991.7kPa |
|---|---|---|
| Pump Flow Capacity | 20.9gal/min | 79L/min |
05 Moldboard Specification
| Cutting Edge | 6 in | |
|---|---|---|
| Blade Width | 12ft in | 3.7m |
| Arc Radius | 16.3in | 414.1mm |
| Throat Clearance | 6.5in | 165.1mm |
| End Bit | 6in | 152.4mm |
06 Service Refill Specification
| Fuel Tank | 100gal | 378.6L |
|---|---|---|
| Hydraulic System | 14.5gal | 54.9L |
| Cooling System | 15gal | 56.8L |
| Def Tank | 3.3gal | 12.5L |
| Circle Drive | 1.8gal | 6.9L |
| Engine Crankcase | 7.9gal | 30L |
07 Machine Weight Specification
| Note | *Typically equipped with push block and ripper. | |
|---|---|---|
| Weight* | 42.4lb | 19.2kg |
| All-Wheel Drive (Awd) Weight | 44.7lb | 20.3kg |
08 Blade Range Specification
| Circle Centershift - Right | 28.6in | 726.5mm |
|---|---|---|
| Circle Centershift - Left | 29.6in | 751.9mm |
| Moldboard Sideshift - Right | 20.1in | 510.6mm |
| Moldboard Sideshift - Left | 26.1in | 663mm |
| Blade Tip Range - Forward | 40 degrees | |
| Blade Tip Range - Backward | 5 degrees | |
| Maximum Shoulder Reach Outside Of Tires - Right | 75.9in | 1927.9mm |
| Maximum Shoulder Reach Outside Of Tires - Left | 69.4in | 1762.8mm |
| Maximum Lift Above Ground | 18.9in | 480.1mm |
| Maximum Depth Of Cut | 28.9in | 734.1mm |
09 Bucket Dimensions
| Dump Clearance At Max Raise | 6.46ft in | 1969mm |
|---|---|---|
| Bucket Width | 3.67ft in | 1118mm |
10 Dimensions Dimensions
| Ground Clearance | 0.63ft in | 191mm |
|---|---|---|
| Length With Bucket On Ground | 11.22ft in | 3419mm |
| Width Over Tires | 3.45ft in | 1049mm |
| Height To Top Of Cab | 7.19ft in | 2189mm |
| Wheelbase | 4.43ft in | 1349mm |
| Hinge Pin - Max Height | 8.88ft in | 2705mm |
| Reach At Max Lift And Dump | 1.3ft in | 394mm |
| Length Of Machine* | 397.6in | 10099.05mm |
| Basic Blade Width | 140in | 3556mm |
| Note | *Typically equipped with push block and ripper. | |
| Maximum Height | 132in | 3352.8mm |
| Width | 97.6 in |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.