Specification sheet Wheel Loader Ref fiat-hitachi-w230-wheel-loader
Fiat-Hitachi W230
The Fiat-Hitachi W230 is a wheel loader with an operating weight of 43,894.04 lb (19,910 kg), a 225 hp engine, and a 5.24 yd³ (4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
43,894.04lb
19,910kg
Engine power
225hp
167.8kW
Net Power Bucket capacity
5.24yd³
4m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Fiat-Hitachi W230 sits at the heavy end of its class:
- Operating weight 43,890 lb heavier than 98% (n=439)
- Engine power 225 hp more powerful than 92% (n=408)
- Bucket capacity 5.2 yd³ larger-bucket than 98% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | 6C7 8.3 | |
| Net Power | 225hp | 167.8kw |
| Gross Power | 235hp | 175.3kw |
| Power Measured @ | 2500rpm | |
| Max Torque | 715.5lb ft | 970Nm |
| Displacement | 506.5cu in | 8.3L |
| Torque Measured @ | 1500rpm | |
| Aspiration | turbo + aftercooled |
02 Operational Specification
| Operating Weight | 43894.1lb | 19910kg |
|---|---|---|
| Fuel Capacity | 79.3gal | 300L |
| Hydraulic System Fluid Capacity | 42.3gal | 160L |
| Engine Oil Fluid Capacity | 6.4gal | 24L |
| Cooling System Fluid Capacity | 15.9gal | 60L |
| Transmission Fluid Capacity | 10.6gal | 40L |
| Front Axle/Diff Fluid Capacity | 10.1gal | 38L |
| Rear Axle/Diff Fluid Capacity | 10.1gal | 38L |
| Static Tipping Weight | 35714.9lb | 16200kg |
| Turning Radius | 2.2ft in | 670mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Rear Axle Oscillation | 22degrees | |
| Tire Size | 23.5 - 25 GP-2B |
03 Transmission Specification
| Transmission Type | Power-Shift Countershaft | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 23.2mph | 37.2km/h |
| Max Speed - Reverse | 24.3mph | 39km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 441.7psi | 3045kPa |
|---|---|---|
| Pump Flow Capacity | 91.2gal/min | 345L/min |
| Raise Time | 6.2sec | |
| Dump Time | 1.4sec | |
| Lower Time | 3.5sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.95ft in | 2725mm |
|---|---|---|
| Bucket Capacity - Heaped | 5.24yd3 | 4m3 |
| Bucket Capacity - Struck | 4.45yd3 | 3.4m3 |
| Bucket Width | 10.06ft in | 3065mm |
| Breakout Force | 4114003.31lb | 18300kN |
06 Dimensions Dimensions
| Ground Clearance | 1.37ft in | 415mm |
|---|---|---|
| Length With Bucket On Ground | 28.02ft in | 8540mm |
| Width Over Tires | 9.54ft in | 2905mm |
| Height To Top Of Cab | 11.26ft in | 3430mm |
| Wheelbase | 10.83ft in | 3300mm |
| Hinge Pin - Max Height | 13.65ft in | 4160mm |
| Reach At Max Lift And Dump | 3.83ft in | 1166mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.