Specification sheet Wheel Loader Ref fiat-hitachi-w170-wheel-loader
Fiat-Hitachi W170
The Fiat-Hitachi W170 is a wheel loader with an operating weight of 31,041.09 lb (14,080 kg), a 170 hp engine, and a 3.41 yd³ (2.6 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
31,041.09lb
14,080kg
Engine power
170hp
126.8kW
Net Power Bucket capacity
3.41yd³
2.6m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Fiat-Hitachi W170 sits in the middle of its class:
- Operating weight 31,040 lb heavier than 52% (n=439)
- Engine power 170 hp more powerful than 55% (n=408)
- Bucket capacity 3.4 yd³ larger-bucket than 56% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | 6CT 8.3 | |
| Net Power | 170hp | 126.8kw |
| Gross Power | 182hp | 135.8kw |
| Power Measured @ | 2500rpm | |
| Max Torque | 513.4lb ft | 696Nm |
| Displacement | 506.5cu in | 8.3L |
| Torque Measured @ | 1500rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 31041.1lb | 14080kg |
|---|---|---|
| Fuel Capacity | 58.2gal | 220L |
| Hydraulic System Fluid Capacity | 39.7gal | 150L |
| Engine Oil Fluid Capacity | 6.4gal | 24L |
| Cooling System Fluid Capacity | 11.9gal | 45L |
| Transmission Fluid Capacity | 5.3gal | 20L |
| Front Axle/Diff Fluid Capacity | 7.7gal | 29L |
| Rear Axle/Diff Fluid Capacity | 9.6gal | 36L |
| Static Tipping Weight | 24471.4lb | 11100kg |
| Turning Radius | 2ft in | 600mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Rear Axle Oscillation | 26degrees | |
| Tire Size | 20.5 - 25 GP-2B |
03 Transmission Specification
| Transmission Type | Power-Shift Countershaft | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 36mph | 58km/h |
| Max Speed - Reverse | 38.5mph | 62km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 441.7psi | 3045kPa |
|---|---|---|
| Pump Flow Capacity | 69.8gal/min | 264L/min |
| Raise Time | 5.7sec | |
| Dump Time | 1.3sec | |
| Lower Time | 3sec | |
| Pump Type | Sealed system with anticavitation and relief valves |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.86ft in | 2700mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.41yd3 | 2.6m3 |
| Bucket Width | 8.32ft in | 2535mm |
| Breakout Force | 3034920.47lb | 13500kN |
06 Dimensions Dimensions
| Ground Clearance | 1.3ft in | 395mm |
|---|---|---|
| Length With Bucket On Ground | 25.3ft in | 7710mm |
| Width Over Tires | 7.81ft in | 2380mm |
| Height To Top Of Cab | 10.83ft in | 3300mm |
| Wheelbase | 10.01ft in | 3050mm |
| Hinge Pin - Max Height | 12.8ft in | 3900mm |
| Reach At Max Lift And Dump | 3.91ft in | 1190mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.