Specification sheet Wheel Loader Ref fiat-hitachi-fb110-2-wheel-loader
Fiat-Hitachi FB110.2
The Fiat-Hitachi FB110.2 is a wheel loader with an operating weight of 18,430.65 lb (8,360 kg), a 106 hp engine, and a 1.57 yd³ (1.2 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
18,430.65lb
8,360kg
Engine power
106hp
79.1kW
Net Power Bucket capacity
1.57yd³
1.2m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Fiat-Hitachi FB110.2 sits above the median for its class:
- Operating weight 18,430 lb heavier than 80% (n=374)
- Engine power 106 hp more powerful than 86% (n=367)
- Bucket capacity 1.6 yd³ larger-bucket than 59% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2249 | |
| Engine Model | 5.0 - 450T/PD | |
| Net Power | 106hp | 79.1kw |
| Gross Power | 108hp | 80.6kw |
| Power Measured @ | 2070rpm | |
| Max Torque | 326.1lb ft | 442Nm |
| Displacement | 304cu in | 5L |
| Torque Measured @ | 1400rpm | |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight | 18430.7lb | 8360kg |
|---|---|---|
| Fuel Capacity | 34.4gal | 130L |
| Hydraulic System Fluid Capacity | 36.2gal | 137L |
| Engine Oil Fluid Capacity | 4.3gal | 16L |
| Cooling System Fluid Capacity | 6.4gal | 24L |
| Transmission Fluid Capacity | 4.8gal | 18L |
| Front Axle/Diff Fluid Capacity | 4.5gal | 17L |
| Rear Axle/Diff Fluid Capacity | 2.4gal | 9L |
| Turning Radius | 17.1ft in | 5210mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 16degrees | |
| Tire Size | 16.9 x 24 (12PR) |
03 Transmission Specification
| Transmission Type | Powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 24.3mph | 39km/h |
| Max Speed - Reverse | 8.6mph | 13.7km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 30.5psi | 210kPa |
|---|---|---|
| Pump Flow Capacity | 42.3gal/min | 160L/min |
| Pump Type | Load Sensing |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.83ft in | 2690mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.57yd3 | 1.2m3 |
| Bucket Width | 7.71ft in | 2350mm |
| Breakout Force | 1663586.04lb | 7400kN |
06 Dimensions Dimensions
| Length With Bucket On Ground | 19.79ft in | 6030mm |
|---|---|---|
| Width Over Tires | 8.14ft in | 2480mm |
| Height To Top Of Cab | 9.36ft in | 2850mm |
| Wheelbase | 7.22ft in | 2200mm |
| Hinge Pin - Max Height | 11.26ft in | 3430mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.