Specification sheet Wheel Loader Ref dressta-530h-wheel-loader
Dressta 530H
The Dressta 530H is a wheel loader with an operating weight of 36,376 lb (16,500 kg), a 195 hp engine, and a 3.7 yd³ (2.8 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
36,376lb
16,500kg
Engine power
195hp
145kW
Net Power Bucket capacity
3.7yd³
2.8m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Dressta 530H sits above the median for its class:
- Operating weight 36,380 lb heavier than 71% (n=439)
- Engine power 195 hp more powerful than 73% (n=408)
- Bucket capacity 3.7 yd³ larger-bucket than 69% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | C 8.3 | |
| Net Power | 195hp | 145kw |
| Gross Power | 205hp | 153kw |
| Power Measured @ | 2000rpm | |
| Max Torque | 714lb ft | 968Nm |
| Displacement | 504.5cu in | 8.3L |
| Torque Measured @ | 1500rpm | |
| Aspiration | 4-cycle diesel, turbocharged, CAC, direct start, direct injection |
02 Operational Specification
| Operating Weight | 36376lb | 16500kg |
|---|---|---|
| Fuel Capacity | 79.3gal | 300L |
| Hydraulic System Fluid Capacity | 43.6gal | 165L |
| Engine Oil Fluid Capacity | 5gal | 19L |
| Cooling System Fluid Capacity | 6.3gal | 24L |
| Transmission Fluid Capacity | 8.2gal | 31L |
| Static Tipping Weight | 29916lb | 13570kg |
| Turning Radius | 21.5ft in | 6540mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 23.5x25,20 PR(L-3) |
03 Transmission Specification
| Transmission Type | Full power shift type, electrically controlled transmission with automatic gear shifting system | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 22.4mph | 37.3km/h |
| Max Speed - Reverse | 16.4mph | 26.4km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 72gal/min | 277L/min |
| Raise Time | 5.9sec | |
| Dump Time | 2.5sec | |
| Lower Time | 4sec | |
| Pump Type | Three multiple vane cartriges, driven from accessory drive. |
05 Bucket Dimensions
| Breakout Force | 30247lb | 13720kN |
|---|---|---|
| Bucket Capacity - Heaped | 3.7yd3 | 2.8m3 |
| Bucket Capacity - Struck | 3.15yd3 | 2.41m3 |
06 Dimensions Dimensions
| Ground Clearance | 1.67ft in | 506mm |
|---|---|---|
| Width Over Tires | 6.92ft in | 2100mm |
| Height To Top Of Cab | 11.17ft in | 3404.62mm |
| Wheelbase | 10.83ft in | 3300.99mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.