Specification sheet Wheel Loader Ref doosan-mega160-v-wheel-loader
Doosan MEGA160-V
The Doosan MEGA160-V is a wheel loader with an operating weight of 18,960 lb (8,600.12 kg), a 104 hp engine, and a 2.1 yd³ (1.6 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
18,960lb
8,600.12kg
Engine power
104hp
77.6kW
Net Power Bucket capacity
2.1yd³
1.6m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Doosan MEGA160-V sits above the median for its class:
- Operating weight 18,960 lb heavier than 84% (n=374)
- Engine power 104 hp more powerful than 84% (n=367)
- Bucket capacity 2.1 yd³ larger-bucket than 83% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2252 | |
| Engine Model | DB58 | |
| Net Power | 104hp | 77.6kw |
| Gross Power | 110hp | 82.1kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 268lb ft | 363.4Nm |
| Displacement | 353cu in | 5.8L |
| Torque Measured @ | 1600rpm | |
| Aspiration | naturally aspired |
02 Operational Specification
| Operating Weight | 18960lb | 8600.2kg |
|---|---|---|
| Fuel Capacity | 48.9gal | 185L |
| Hydraulic System Fluid Capacity | 26.5gal | 100L |
| Engine Oil Fluid Capacity | 3.5gal | 13L |
| Cooling System Fluid Capacity | 7.7gal | 29L |
| Transmission Fluid Capacity | 5.3gal | 20L |
| Front Axle/Diff Fluid Capacity | 4.8gal | 18L |
| Rear Axle/Diff Fluid Capacity | 4.8gal | 18L |
| Static Tipping Weight | 14330lb | 6500kg |
| Turning Radius | 17.7ft in | 5390mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Rear Axle Oscillation | 22degrees | |
| Tire Size | 17.5-25 |
03 Transmission Specification
| Transmission Type | auto power-shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 21.5mph | 34.5km/h |
| Max Speed - Reverse | 14mph | 22.4km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2845psi | 19616kPa |
|---|---|---|
| Pump Flow Capacity | 37gal/min | 140L/min |
| Raise Time | 6sec | |
| Dump Time | 1.5sec | |
| Lower Time | 3.1sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.01ft in | 2745mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.1yd3 | 1.6m3 |
| Bucket Width | 8.04ft in | 2450mm |
| Breakout Force | 17200lb | 17200- |
06 Dimensions Dimensions
| Ground Clearance | 1.48ft in | 450mm |
|---|---|---|
| Length With Bucket On Ground | 20.97ft in | 6390mm |
| Width Over Tires | 7.55ft in | 2300mm |
| Height To Top Of Cab | 10.44ft in | 3180mm |
| Wheelbase | 8.86ft in | 2700mm |
| Hinge Pin - Max Height | 11.85ft in | 3610mm |
| Reach At Max Lift And Dump | 2.95ft in | 899mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.