Specification sheet Wheel Loader Ref doosan-dl550-5-wheel-loader

Doosan DL550-5

The Doosan DL550-5 is a wheel loader with an operating weight of 69,897.56 lb (31,705 kg), a 380 hp engine, a 7.46 yd³ (5.7 m³) bucket, and a dig depth of 0.26 ft (80 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
69,897.56lb
31,705kg
Engine power
380hp
283.37kW
Gross Power
Bucket capacity
7.46yd³
5.7m³
Dig depth
0.26ft
80mm

Where it sits in its classpercentile · medium wheel loaders

Among 198 medium wheel loaders (45,000–90,000 lb), the Doosan DL550-5 sits at the heavy end of its class:

  • Operating weight 69,900 lb heavier than 93% (n=198)
  • Engine power 380 hp more powerful than 97% (n=190)
  • Bucket capacity 7.5 yd³ larger-bucket than 94% (n=174)

Scale drawingdrawn to scale · mm

3785B480C9680A
Side elevation
3785B4458D
Front elevation

01 Engine Specification

Starter 8hp 6kw
Horsepower -Net 271hp 202.1kw
Number Of Cylinders 6
Engine Make Scania
Engine Model DC13
Gross Power 380hp 283.4kw
Power Measured @ 1800rpm
Displacement 775.1cu in 12.7L
Net Torque 1121.1lb ft 1520Nm
Torque Measured @ 1400rpm
Bore 5.2in 130mm
Stroke 6.3in 160mm
Alternator 100amps

02 Capacities Specification

Fuel Tank 117gal 442.9L
Diesel Exhaust Fluid (Def) Tank 16gal 60.6L
Cooling System 16gal 60.6L
Transmission 14gal 53L
Hydraulic System 65gal 246.1L
Engine Oil 12gal 45.5L

03 Operational Specification

Operating Weight 69897.6lb 31705kg
Front Axle/Diff Fluid Capacity 16.5gal 62.5L
Rear Axle/Diff Fluid Capacity 16.9gal 64L
Static Tipping Weight 53175.5lb 24120kg
Operating Voltage 28V
Tire Size 29.5-25

04 Transmission Specification

Max Speed - Forward 22.4mph 36.1km/h
Max Speed - Reverse 16.1mph 26km/h

05 Hydraulic System Specification

Raise Time 6.4sec
Dump Time 1.4sec
Lower Time 4.2sec
Relief Valve Pressure 3989psi 27503.2kPa

06 Bucket Dimensions

Bucket Capacity - Heaped 7.46yd3 5.7m3
Bucket Width 11.18ft in 3405mm
Breakout Force 55303lb 246kN

07 Dimensions Dimensions

Ground Clearance 1.58ft in 480mm
Width Over Tires 14.63ft in 4458mm
Wheelbase 12.14ft in 3700mm
Hinge Pin - Max Height 15.74ft in 4795mm
Reach At Max Lift And Dump 4.2ft in 1280mm
Overall Height 12.42ft in 3785mm
Overall Length 31.76ft in 9680mm
Digging Depth 3.15in 80mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.