Specification sheet Wheel Loader Ref doosan-dl450-5-wheel-loader

Doosan DL450-5

The Doosan DL450-5 is a wheel loader with an operating weight of 56,868.24 lb (25,795 kg), a 344.65 hp engine, a 6.28 yd³ (4.8 m³) bucket, and a dig depth of 0.35 ft (105 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
56,868.24lb
25,795kg
Engine power
344.65hp
257kW
Gross Power
Bucket capacity
6.28yd³
4.8m³
Dig depth
0.35ft
105mm

Where it sits in its classpercentile · medium wheel loaders

Among 198 medium wheel loaders (45,000–90,000 lb), the Doosan DL450-5 sits above the median for its class:

  • Operating weight 56,870 lb heavier than 61% (n=198)
  • Engine power 345 hp more powerful than 90% (n=190)
  • Bucket capacity 6.3 yd³ larger-bucket than 73% (n=174)

Scale drawingdrawn to scale · mm

3581B455C9155A
Side elevation
3581B2984D
Front elevation

01 Engine Specification

Starter 8hp 6kw
Horsepower -Net 271hp 202.1kw
Number Of Cylinders 6
Engine Make Scania
Engine Model DC13
Gross Power 344.7hp 257kw
Power Measured @ 1800rpm
Displacement 775.1cu in 12.7L
Net Torque 1121.1lb ft 1520Nm
Torque Measured @ 1400rpm
Bore 5.2in 130mm
Stroke 6.3in 160mm
Alternator 100amps

02 Capacities Specification

Fuel Tank 89gal 337L
Diesel Exhaust Fluid (Def) Tank 16gal 60.6L
Cooling System 16gal 60.6L
Transmission 14gal 53L
Hydraulic System 61gal 231L
Engine Oil 10gal 37.9L

03 Operational Specification

Operating Weight 56868.3lb 25795kg
Front Axle/Diff Fluid Capacity 11gal 41.7L
Rear Axle/Diff Fluid Capacity 11gal 41.7L
Static Tipping Weight 45227.9lb 20515kg
Operating Voltage 28V
Tire Size 26.5-25

04 Transmission Specification

Max Speed - Forward 22.4mph 36.1km/h
Max Speed - Reverse 16.4mph 26.4km/h

05 Hydraulic System Specification

Raise Time 6.3sec
Dump Time 1.6sec
Lower Time 3sec
Relief Valve Pressure 3989psi 27503.2kPa

06 Bucket Dimensions

Bucket Capacity - Heaped 6.28yd3 4.8m3
Bucket Width 10.76ft in 3277mm
Breakout Force 51930lb 231kN

07 Dimensions Dimensions

Ground Clearance 1.5ft in 455mm
Width Over Tires 9.79ft in 2984mm
Wheelbase 11.65ft in 3550mm
Hinge Pin - Max Height 14.77ft in 4500mm
Reach At Max Lift And Dump 4.2ft in 1280mm
Overall Height 11.75ft in 3581mm
Overall Length 30.04ft in 9155mm
Digging Depth 4.14in 105mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.