Specification sheet Wheel Loader Ref doosan-dl420-5-wheel-loader

Doosan DL420-5

The Doosan DL420-5 is a wheel loader with an operating weight of 50,783.48 lb (23,035 kg), a 344.65 hp engine, a 5.5 yd³ (4.2 m³) bucket, and a dig depth of 0.61 ft (185 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
50,783.48lb
23,035kg
Engine power
344.65hp
257kW
Gross Power
Bucket capacity
5.5yd³
4.2m³
Dig depth
0.61ft
185mm

Where it sits in its classpercentile · medium wheel loaders

Among 198 medium wheel loaders (45,000–90,000 lb), the Doosan DL420-5 sits below the median for its class:

  • Operating weight 50,780 lb lighter than 69% (n=198)
  • Engine power 345 hp more powerful than 90% (n=190)
  • Bucket capacity 5.5 yd³ smaller-bucket than 56% (n=174)

Scale drawingdrawn to scale · mm

3535B495C8720A
Side elevation
3535B2984D
Front elevation

01 Engine Specification

Starter 8hp 6kw
Horsepower -Net 271hp 202.1kw
Number Of Cylinders 6
Engine Make Scania
Engine Model DC13
Gross Power 344.7hp 257kw
Power Measured @ 1800rpm
Displacement 775.1cu in 12.7L
Net Torque 1121.1lb ft 1520Nm
Torque Measured @ 1400rpm
Bore 5.2in 130mm
Stroke 6.3in 160mm
Alternator 100amps

02 Capacities Specification

Fuel Tank 73gal 276.4L
Diesel Exhaust Fluid (Def) Tank 16gal 60.6L
Cooling System 16gal 60.6L
Transmission 14gal 53L
Hydraulic System 61gal 231L
Engine Oil 10gal 37.9L

03 Operational Specification

Operating Weight 50783.5lb 23035kg
Front Axle/Diff Fluid Capacity 11gal 41.7L
Rear Axle/Diff Fluid Capacity 11gal 41.7L
Static Tipping Weight 40256.5lb 18260kg
Operating Voltage 28V
Tire Size 26.5-25

04 Transmission Specification

Max Speed - Forward 22.4mph 36.1km/h
Max Speed - Reverse 11.5mph 18.6km/h

05 Hydraulic System Specification

Raise Time 6sec
Dump Time 1.7sec
Lower Time 3sec
Relief Valve Pressure 3989psi 27503.2kPa

06 Bucket Dimensions

Bucket Capacity - Heaped 5.5yd3 4.2m3
Bucket Width 10.8ft in 3290mm
Breakout Force 47209lb 210kN

07 Dimensions Dimensions

Ground Clearance 1.63ft in 495mm
Width Over Tires 9.79ft in 2984mm
Wheelbase 11.49ft in 3500mm
Hinge Pin - Max Height 15.57ft in 4745mm
Reach At Max Lift And Dump 4.07ft in 1240mm
Overall Height 11.6ft in 3535mm
Overall Length 28.61ft in 8720mm
Digging Depth 7.29in 185mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.