Specification sheet Wheel Loader Ref doosan-dl350-5-wheel-loader

Doosan DL350-5

The Doosan DL350-5 is a wheel loader with an operating weight of 42,869 lb (19,445.06 kg), a 271 hp engine, a 4.84 yd³ (3.7 m³) bucket, and a dig depth of 0.3 ft (90 mm).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
42,869lb
19,445.06kg
Engine power
271hp
202.09kW
Gross Power
Bucket capacity
4.84yd³
3.7m³
Dig depth
0.3ft
90mm

Where it sits in its classpercentile · small wheel loaders

Among 439 small wheel loaders (22,000–45,000 lb), the Doosan DL350-5 sits at the heavy end of its class:

  • Operating weight 42,870 lb heavier than 95% (n=439)
  • Engine power 271 hp more powerful than 99% (n=408)
  • Bucket capacity 4.8 yd³ larger-bucket than 97% (n=387)

Scale drawingdrawn to scale · mm

3475B430C8320A
Side elevation
3475B2776D
Front elevation

01 Engine Specification

Starter 8hp 6kw
Horsepower -Net 271hp 202.1kw
Number Of Cylinders 5
Engine Make Scania
Engine Model DC09
Gross Power 271hp 202.1kw
Power Measured @ 1800rpm
Displacement 567.6cu in 9.3L
Net Torque 940lb ft 1274.5Nm
Torque Measured @ 1400rpm
Bore 5.2in 130mm
Stroke 5.6in 140mm
Alternator 100amps

02 Capacities Specification

Fuel Tank 64gal 242.3L
Diesel Exhaust Fluid (Def) Tank 10gal 37.9L
Cooling System 13gal 49.3L
Transmission 14gal 53L
Hydraulic System 61gal 231L
Engine Oil 9gal 34.1L

03 Operational Specification

Operating Weight 42869lb 19445.1kg
Front Axle/Diff Fluid Capacity 11gal 41.7L
Rear Axle/Diff Fluid Capacity 11gal 41.7L
Static Tipping Weight 34855.1lb 15810kg
Operating Voltage 28V
Tire Size 23.5-25

04 Transmission Specification

Max Speed - Forward 22.4mph 36.1km/h
Max Speed - Reverse 17.1mph 27.6km/h

05 Hydraulic System Specification

Raise Time 5.9sec
Dump Time 1.4sec
Lower Time 3.5sec
Relief Valve Pressure 3626psi 25000kPa

06 Bucket Dimensions

Bucket Capacity - Heaped 4.84yd3 3.7m3
Bucket Width 9.85ft in 3000mm
Breakout Force 36869lb 164.01kN

07 Dimensions Dimensions

Ground Clearance 1.42ft in 430mm
Width Over Tires 9.11ft in 2776mm
Wheelbase 10.83ft in 3300mm
Hinge Pin - Max Height 13.69ft in 4170mm
Reach At Max Lift And Dump 4.01ft in 1220mm
Overall Height 11.41ft in 3475mm
Overall Length 27.3ft in 8320mm
Digging Depth 3.55in 90mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.