Specification sheet Wheel Loader Ref doosan-dl300-wheel-loader
Doosan DL300
The Doosan DL300 is a wheel loader with an operating weight of 38,140 lb (17,300.02 kg), a 217 hp engine, and a 3.93 yd³ (3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
38,140lb
17,300.02kg
Engine power
217hp
161.9kW
Net Power Bucket capacity
3.93yd³
3m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Doosan DL300 sits above the median for its class:
- Operating weight 38,140 lb heavier than 78% (n=439)
- Engine power 217 hp more powerful than 87% (n=408)
- Bucket capacity 3.9 yd³ larger-bucket than 72% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2252 | |
| Engine Model | DL08 | |
| Net Power | 217hp | 161.9kw |
| Gross Power | 227hp | 169.3kw |
| Power Measured @ | 2000rpm | |
| Max Torque | 759lb ft | 1029Nm |
| Displacement | 466cu in | 7.7L |
| Torque Measured @ | 1300rpm | |
| Aspiration | turbo charged air to air intercooler |
02 Operational Specification
| Operating Weight | 38140lb | 17300.1kg |
|---|---|---|
| Fuel Capacity | 87.2gal | 330L |
| Hydraulic System Fluid Capacity | 55.5gal | 210L |
| Engine Oil Fluid Capacity | 9.3gal | 35L |
| Cooling System Fluid Capacity | 13.3gal | 50L |
| Transmission Fluid Capacity | 12.7gal | 48L |
| Front Axle/Diff Fluid Capacity | 10.1gal | 38L |
| Rear Axle/Diff Fluid Capacity | 8gal | 30L |
| Static Tipping Weight | 31967lb | 14500kg |
| Turning Radius | 20.9ft in | 6360mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 60amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 23.5-25-16PR-L3 |
03 Transmission Specification
| Transmission Type | full power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 21.5mph | 34.5km/h |
| Max Speed - Reverse | 14.8mph | 23.8km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2900.8psi | 20000kPa |
|---|---|---|
| Pump Flow Capacity | 74gal/min | 280L/min |
| Raise Time | 5.9sec | |
| Dump Time | 1.9sec | |
| Lower Time | 3.7sec | |
| Pump Type | tandem vane pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.13ft in | 2780mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.93yd3 | 3m3 |
| Bucket Width | 9.59ft in | 2920mm |
| Breakout Force | 36419lb | 36419- |
06 Dimensions Dimensions
| Ground Clearance | 1.55ft in | 470mm |
|---|---|---|
| Length With Bucket On Ground | 26.74ft in | 8150mm |
| Width Over Tires | 9.06ft in | 2760mm |
| Height To Top Of Cab | 11.28ft in | 3438mm |
| Wheelbase | 10.5ft in | 3200mm |
| Hinge Pin - Max Height | 13.13ft in | 4000mm |
| Reach At Max Lift And Dump | 9.13ft in | 2780mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.