Specification sheet Wheel Loader Ref doosan-dl280-5-wheel-loader

Doosan DL280-5

The Doosan DL280-5 is a wheel loader with an operating weight of 34,262 lb (15,540.99 kg), a 172 hp engine, and a 3.67 yd³ (2.8 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
34,262lb
15,540.99kg
Engine power
172hp
128.27kW
Gross Power
Bucket capacity
3.67yd³
2.8m³

Where it sits in its classpercentile · small wheel loaders

Among 439 small wheel loaders (22,000–45,000 lb), the Doosan DL280-5 sits above the median for its class:

  • Operating weight 34,260 lb heavier than 64% (n=439)
  • Engine power 172 hp more powerful than 58% (n=408)
  • Bucket capacity 3.7 yd³ larger-bucket than 66% (n=387)

01 Engine Specification

Starter 8hp 6kw
Number Of Cylinders 6
Max. Torque Iso14396 593lb ft 804.1Nm
Engine Make Doosan
Engine Model DL06
Air Cleaner Double Element
Gross Power 172hp 128.3kw
Power Measured @ 2100rpm
Battery 100 AH
Displacement 360.1cu in 5.9L
Torque Measured @ 1400rpm
Bore 4in 100mm
Stroke 5in 125mm
Alternator 80amps

02 Operational Specification

Def Tank Capacity 8.4gal 31.5L
Operating Weight 34262lb 15541kg
Fuel Capacity 58.7gal 222L
Hydraulic System Fluid Capacity 31.8gal 120L
Engine Oil Fluid Capacity 7.2gal 27L
Cooling System Fluid Capacity 8.4gal 31.6L
Transmission Fluid Capacity 9.8gal 37L
Front Axle/Diff Fluid Capacity 9.3gal 35L
Rear Axle/Diff Fluid Capacity 6.1gal 23L
Static Tipping Weight 26486lb 12013.9kg
Operating Voltage 24V
Tire Size 20.5-R25 (L3)

03 Transmission Specification

Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed - Forward 22.1mph 35.5km/h
Max Speed - Reverse 15.1mph 24.2km/h

04 Hydraulic System Specification

Pump Flow Capacity 55.5gal/min 210L/min

05 Bucket Dimensions

Breakout Force 30349lb 135kN
Bucket Capacity - Heaped 3.67yd3 2.8m3
Bucket Width 8.99ft in 2740mm

06 Dimensions Dimensions

Ground Clearance 1.42ft in 432mm
Width Over Tires 8.44ft in 2570mm
Wheelbase 9.88ft in 3010mm
Hinge Pin - Max Height 12.93ft in 3940mm
Overall Length 303.15in 7700mm
Tread Width 80.32in 2040mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.