Specification sheet Wheel Loader Ref doosan-dl250tc-5-wheel-loader

Doosan DL250TC-5

The Doosan DL250TC-5 is a wheel loader with an operating weight of 31,592 lb (14,329.9 kg), a 172 hp engine, and a 3.27 yd³ (2.5 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
31,592lb
14,329.9kg
Engine power
172hp
128.27kW
Gross Power
Bucket capacity
3.27yd³
2.5m³

Where it sits in its classpercentile · small wheel loaders

Among 439 small wheel loaders (22,000–45,000 lb), the Doosan DL250TC-5 sits in the middle of its class:

  • Operating weight 31,590 lb heavier than 55% (n=439)
  • Engine power 172 hp more powerful than 58% (n=408)
  • Bucket capacity 3.3 yd³ larger-bucket than 51% (n=387)

01 Engine Specification

Starter 8hp 6kw
Number Of Cylinders 6
Max. Torque Iso14396 593lb ft 804.1Nm
Engine Make Doosan
Engine Model DL06
Air Cleaner Double Element
Gross Power 172hp 128.3kw
Power Measured @ 2100rpm
Battery 100 AH
Displacement 360.1cu in 5.9L
Torque Measured @ 1400rpm
Bore 4in 100mm
Stroke 5in 125mm
Alternator 80amps

02 Operational Specification

Def Tank Capacity 8.4gal 31.5L
Operating Weight 31592lb 14329.9kg
Fuel Capacity 58.7gal 222L
Hydraulic System Fluid Capacity 31.8gal 120L
Engine Oil Fluid Capacity 7.2gal 27L
Cooling System Fluid Capacity 10.6gal 40L
Transmission Fluid Capacity 8gal 30L
Front Axle/Diff Fluid Capacity 9.3gal 35L
Rear Axle/Diff Fluid Capacity 6.1gal 23L
Static Tipping Weight 20470lb 9285kg
Operating Voltage 24V
Tire Size 20.5-R25 (L3)

03 Transmission Specification

Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed - Forward 23.5mph 37.8km/h
Max Speed - Reverse 15.1mph 24.2km/h

04 Hydraulic System Specification

Pump Flow Capacity 41gal/min 155L/min

05 Bucket Dimensions

Breakout Force 22930lb 102kN
Bucket Capacity - Heaped 3.27yd3 2.5m3
Bucket Width 8.99ft in 2740mm

06 Dimensions Dimensions

Ground Clearance 1.43ft in 435mm
Width Over Tires 8.67ft in 2640mm
Wheelbase 9.91ft in 3020mm
Hinge Pin - Max Height 12.1ft in 3688.08mm
Overall Length 307.29in 7805mm
Tread Width 80.32in 2040mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.