Specification sheet Wheel Loader Ref doosan-dl250-5-wheel-loader

Doosan DL250-5

The Doosan DL250-5 is a wheel loader with an operating weight of 30,115.15 lb (13,660 kg), a 172 hp engine, and a 3.27 yd³ (2.5 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
30,115.15lb
13,660kg
Engine power
172hp
128.27kW
Gross Power
Bucket capacity
3.27yd³
2.5m³

Where it sits in its classpercentile · small wheel loaders

Among 439 small wheel loaders (22,000–45,000 lb), the Doosan DL250-5 sits in the middle of its class:

  • Operating weight 30,120 lb lighter than 54% (n=439)
  • Engine power 172 hp more powerful than 58% (n=408)
  • Bucket capacity 3.3 yd³ larger-bucket than 51% (n=387)

01 Engine Specification

Number Of Cylinders 6
Max. Torque Iso14396 593lb ft 804.1Nm
Engine Make Doosan
Engine Model DL06
Gross Power 172hp 128.3kw
Power Measured @ 2100rpm
Displacement 360.1cu in 5.9L
Torque Measured @ 1400rpm
Bore 4in 100mm
Stroke 5in 125mm
Alternator 80amps

02 Operational Specification

Def Tank Capacity 8.4gal 31.5L
Operating Weight 30115.2lb 13660kg
Fuel Capacity 58.7gal 222L
Hydraulic System Fluid Capacity 31.8gal 120L
Engine Oil Fluid Capacity 7.2gal 27L
Cooling System Fluid Capacity 10.6gal 40L
Transmission Fluid Capacity 8gal 30L
Front Axle/Diff Fluid Capacity 9.3gal 35L
Rear Axle/Diff Fluid Capacity 6.1gal 23L
Static Tipping Weight 21230.6lb 9630kg
Operating Voltage 24V
Tire Size 20.5-R25 (L3)

03 Transmission Specification

Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed - Forward 23.5mph 37.8km/h
Max Speed - Reverse 15.1mph 24.2km/h

04 Bucket Dimensions

Breakout Force 2429959.66lb 10809kN
Bucket Capacity - Heaped 3.27yd3 2.5m3
Bucket Width 8.99ft in 2740mm

05 Dimensions Dimensions

Ground Clearance 1.43ft in 435mm
Width Over Tires 8.67ft in 2640mm
Wheelbase 9.91ft in 3020mm
Hinge Pin - Max Height 12.66ft in 3858mm
Overall Length 294.3in 7475mm
Tread Width 80.32in 2040mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.