Specification sheet Wheel Loader Ref doosan-dl220-5-wheel-loader

Doosan DL220-5

The Doosan DL220-5 is a wheel loader with an operating weight of 27,381.42 lb (12,420 kg), a 160 hp engine, and a 3.01 yd³ (2.3 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
27,381.42lb
12,420kg
Engine power
160hp
119.32kW
Gross Power
Bucket capacity
3.01yd³
2.3m³

Where it sits in its classpercentile · small wheel loaders

Among 439 small wheel loaders (22,000–45,000 lb), the Doosan DL220-5 sits below the median for its class:

  • Operating weight 27,380 lb lighter than 71% (n=439)
  • Engine power 160 hp less powerful than 56% (n=408)
  • Bucket capacity 3 yd³ smaller-bucket than 60% (n=387)

01 Engine Specification

Number Of Cylinders 6
Max. Torque Iso14396 542lb ft 734.9Nm
Engine Make Doosan
Engine Model DL06
Gross Power 160hp 119.4kw
Power Measured @ 2100rpm
Displacement 360.1cu in 5.9L
Torque Measured @ 1400rpm
Bore 4in 100mm
Stroke 5in 125mm
Alternator 80amps

02 Operational Specification

Def Tank Capacity 8.4gal 31.5L
Operating Weight 27381.5lb 12420kg
Fuel Capacity 58.7gal 222L
Hydraulic System Fluid Capacity 31.8gal 120L
Engine Oil Fluid Capacity 7.2gal 27L
Cooling System Fluid Capacity 10.6gal 40L
Transmission Fluid Capacity 8gal 30L
Front Axle/Diff Fluid Capacity 5.7gal 21.5L
Rear Axle/Diff Fluid Capacity 5.7gal 21.5L
Static Tipping Weight 21230.6lb 9630kg
Operating Voltage 24V
Tire Size 20.5-R25 (L3)

03 Transmission Specification

Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed - Forward 24.3mph 39km/h

04 Bucket Dimensions

Breakout Force 2315307.11lb 10299kN
Bucket Capacity - Heaped 3.01yd3 2.3m3
Bucket Width 8.37ft in 2550mm

05 Dimensions Dimensions

Ground Clearance 1.43ft in 435mm
Width Over Tires 8.08ft in 2460mm
Wheelbase 9.88ft in 3010mm
Hinge Pin - Max Height 12.67ft in 3860mm
Overall Length 293.12in 7445mm
Tread Width 75.99in 1930mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.