Specification sheet Wheel Loader Ref daewoo-mega-300-v-wheel-loader

Daewoo Mega 300-V

The Daewoo Mega 300-V is a wheel loader with an operating weight of 83,383.24 lb (37,822 kg), a 209.2 hp engine, and a 3.93 yd³ (3 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
83,383.24lb
37,822kg
Engine power
209.2hp
156kW
Gross Power
Bucket capacity
3.93yd³
3m³

Where it sits in its classpercentile · medium wheel loaders

Among 198 medium wheel loaders (45,000–90,000 lb), the Daewoo Mega 300-V sits at the heavy end of its class:

  • Operating weight 83,380 lb heavier than 99% (n=198)
  • Engine power 209 hp less powerful than 93% (n=190)
  • Bucket capacity 3.9 yd³ smaller-bucket than 97% (n=174)

Scale drawingdrawn to scale · mm

3470B470C8085A
Side elevation
3470B2755D
Front elevation

01 Engine Specification

Starter 8.9hp 6.6kw
Engine Model DE08TIS
Gross Power 209.2hp 156kw
Power Measured @ 2100rpm
Max Torque 412lb ft 558.6Nm
Displacement 492.5cu in 8.1L
Net Torque 665.3lb ft 902Nm
Torque Measured @ 1300rpm
Aspiration Turbocharged
Bore 4.4in 111mm
Stroke 5.5in 139mm

02 Operational Specification

Operating Weight 83383.3lb 37822kg
Fuel Capacity 87.2gal 330L
Hydraulic System Fluid Capacity 55.5gal 210L
Front Axle/Diff Fluid Capacity 10.1gal 38L
Rear Axle/Diff Fluid Capacity 8gal 30L
Turning Radius 42ft in 12800mm
Operating Voltage 24V
Alternator Supplied Amperage 60amps
Tire Size 23.5 - 25 - 16PR - L3

03 Transmission Specification

Transmission Type Full auto power-shift countershaft
Number Of Forward Gears 4
Number Of Reverse Gears 4
Max Speed - Forward 21.1mph 34km/h
Max Speed - Reverse 21.1mph 34km/h

04 Hydraulic System Specification

Relief Valve Setting 2845psi 19615.6kPa
Pump Flow Capacity 72.7gal/min 275L/min
Pump Type gear type

05 Bucket Dimensions

Bucket Capacity - Heaped 3.93yd3 3m3
Breakout Force 40785lb 181.43kN

06 Dimensions Dimensions

Ground Clearance 1.55ft in 470mm
Length With Bucket On Ground 26.53ft in 8085mm
Width Over Tires 9.04ft in 2755mm
Height To Top Of Cab 11.39ft in 3470mm
Wheelbase 10.5ft in 3200mm
Hinge Pin - Max Height 13.13ft in 4000mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.