Specification sheet Skid Steer Loader Ref daewoo-dsl702-skid-steer-loader
Daewoo DSL702
The Daewoo DSL702 is a skid steer loader with an operating weight of 6,095.79 lb (2,765 kg), a 51 hp engine, a rated operating capacity of 1,499.15 lb (680 kg), and a 0.5 yd³ (0.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
6,095.79lb
2,765kg
Engine power
51hp
38.1kW
Gross Power Rated operating capacity
1,499.15lb
680kg
Bucket capacity
0.5yd³
0.4m³
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Daewoo DSL702 sits below the median for its class:
- Operating weight 6,100 lb lighter than 68% (n=334)
- Engine power 51 hp less powerful than 70% (n=335)
- Rated operating capacity 1,500 lb lower-rated than 77% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2253 | |
| Engine Model | D427 | |
| Gross Power | 51hp | 38.1kw |
| Power Measured @ | 2400rpm | |
| Displacement | 164.8cu in | 2.7L |
02 Operational Specification
| Operational Weight | 6095.8lb | 2765kg |
|---|---|---|
| Fuel Capacity | 14.3gal | 54L |
| Max Speed | 6.8mph | 10.8km/h |
| Tire Size | 10 x 16.5 |
03 Loader Specification
| Breakout Force | 3284.9lb | 1490kg |
|---|---|---|
| Operating Load Rating | 1499.2lb | 680kg |
| Bucket Capacity | 0.5yd3 | 0.4m3 |
04 Hydraulic Specification
| Pump Flow Capacity | 15.9gal/min | 60L/min |
|---|
05 Dimensions Dimensions
| Length With Bucket | 10.53ft in | 3208mm |
|---|---|---|
| Width Over Tires | 4.88ft in | 1486mm |
| Ground Clearance | 7.49in | 190mm |
| Height To Top Of Cab | 6.42ft in | 1954mm |
| Wheelbase | 3.53ft in | 1074mm |
| Length W/O Bucket | 8.28ft in | 2521mm |
| Clearance At Max Lift And Dump | 7.3ft in | 2224mm |
| Reach At Max Lift And Dump | 25.4in | 645mm |
| Turning Radius From Center - Machine Rear | 63.27in | 1607mm |
| Turning Radius From Center - Inc Bucket | 74.85in | 1901mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.