Specification sheet Wheel Loader Ref clark-michigan-75c-wheel-loader
Clark Michigan 75C
The Clark Michigan 75C is a wheel loader with an operating weight of 31,482.02 lb (14,280 kg), a 154.3 hp engine, and a 2.49 yd³ (1.9 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
31,482.02lb
14,280kg
Engine power
154.3hp
115kW
Net Power Bucket capacity
2.49yd³
1.9m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Clark Michigan 75C sits in the middle of its class:
- Operating weight 31,480 lb heavier than 54% (n=439)
- Engine power 154 hp less powerful than 59% (n=408)
- Bucket capacity 2.5 yd³ smaller-bucket than 85% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2347 | |
|---|---|---|
| Engine Model | V-504C | |
| Net Power | 154.3hp | 115kw |
| Gross Power | 152.9hp | 114kw |
| Max Torque | 374.7lb ft | 508Nm |
| Displacement | 504cu in | 8.3L |
02 Operational Specification
| Operating Weight | 31482.1lb | 14280kg |
|---|---|---|
| Fuel Capacity | 70.1gal | 265L |
| Hydraulic System Fluid Capacity | 50.1gal | 189.3L |
| Engine Oil Fluid Capacity | 7.1gal | 26.5L |
| Cooling System Fluid Capacity | 13gal | 49.2L |
| Transmission Fluid Capacity | 8.1gal | 30.3L |
| Front Axle/Diff Fluid Capacity | 3.1gal | 11.4L |
| Rear Axle/Diff Fluid Capacity | 3.1gal | 11.4L |
| Static Tipping Weight | 27200.7lb | 12338kg |
| Turning Radius | 20ft in | 6070mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 65amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 20.5-25 12PR (L-3) |
03 Transmission Specification
| Transmission Type | Clark countershaft powershift | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 20mph | 32.1km/h |
| Max Speed - Reverse | 20mph | 32.1km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2500psi | 17236.9kPa |
|---|---|---|
| Pump Flow Capacity | 50gal/min | 189L/min |
| Raise Time | 6.7sec | |
| Dump Time | 1sec | |
| Lower Time | 3.5sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.25ft in | 2819mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.49yd3 | 1.9m3 |
| Bucket Capacity - Struck | 2.1yd3 | 1.6m3 |
| Bucket Width | 8.67ft in | 2642mm |
| Breakout Force | _- | 119.6kN |
06 Dimensions Dimensions
| Ground Clearance | 1.15ft in | 350mm |
|---|---|---|
| Length With Bucket On Ground | 22.89ft in | 6975mm |
| Width Over Tires | 8.19ft in | 2496mm |
| Height To Top Of Cab | 10.84ft in | 3302mm |
| Wheelbase | 9.38ft in | 2858mm |
| Hinge Pin - Max Height | 12.21ft in | 3721mm |
| Reach At Max Lift And Dump | 2.59ft in | 787mm |
?Questions & answersfrom this machine's data
- How much does a Clark Michigan 75C wheel loader weigh?
- A Clark Michigan 75C wheel loader has an operating weight of 31,482 lb (14,280 kg).
- What engine does a Clark Michigan 75C wheel loader have?
- A Clark Michigan 75C wheel loader is powered by a V-504C engine producing 154.3 hp (115 kW).
- What size bucket does a Clark Michigan 75C wheel loader have?
- A Clark Michigan 75C wheel loader has a bucket capacity of 2.5 yd³ (1.9 m³).
- How much fuel does a Clark Michigan 75C wheel loader hold?
- A Clark Michigan 75C wheel loader has a fuel capacity of 70.1 gal (265 L).
- What is the ground clearance of a Clark Michigan 75C wheel loader?
- A Clark Michigan 75C wheel loader has a ground clearance of 1.2 ft (350 mm).
- How long is a Clark Michigan 75C wheel loader?
- A Clark Michigan 75C wheel loader has an overall length of 22.9 ft (6,975 mm) with the bucket on the ground.
- How fast does a Clark Michigan 75C wheel loader travel?
- A Clark Michigan 75C wheel loader has a maximum forward travel speed of 20 mph (32.1 km/h).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.