Specification sheet Wheel Loader Ref clark-michigan-55c-wheel-loader
Clark Michigan 55C
The Clark Michigan 55C is a wheel loader with an operating weight of 23,708.52 lb (10,754 kg), a 115.4 hp engine, and a 1.97 yd³ (1.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
23,708.52lb
10,754kg
Engine power
115.4hp
86kW
Net Power Bucket capacity
1.97yd³
1.5m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Clark Michigan 55C sits at the compact end of its class:
- Operating weight 23,710 lb lighter than 90% (n=439)
- Engine power 115 hp less powerful than 95% (n=408)
- Bucket capacity 2 yd³ smaller-bucket than 98% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2347 | |
|---|---|---|
| Engine Model | V-378C | |
| Net Power | 115.4hp | 86kw |
| Gross Power | 123.4hp | 92kw |
| Max Torque | 280.3lb ft | 380Nm |
| Displacement | 378.4cu in | 6.2L |
02 Operational Specification
| Operating Weight | 23708.6lb | 10754kg |
|---|---|---|
| Fuel Capacity | 39.9gal | 151L |
| Hydraulic System Fluid Capacity | 31.8gal | 120L |
| Engine Oil Fluid Capacity | 3.7gal | 14L |
| Cooling System Fluid Capacity | 9.6gal | 36L |
| Transmission Fluid Capacity | 5gal | 18.9L |
| Front Axle/Diff Fluid Capacity | 3gal | 11L |
| Rear Axle/Diff Fluid Capacity | 3gal | 11L |
| Static Tipping Weight | 171.3lb | 77.7kg |
| Turning Radius | 19.2ft in | 5850mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 18degrees | |
| Tire Size | 17.5-25 |
03 Transmission Specification
| Transmission Type | Clark countershaft powershift | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 17.3mph | 27.7km/h |
| Max Speed - Reverse | 17.3mph | 27.7km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2400psi | 16547.5kPa |
|---|---|---|
| Pump Flow Capacity | 41.6gal/min | 157.2L/min |
| Raise Time | 6.5sec | |
| Dump Time | 2sec | |
| Lower Time | 3.5sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.23ft in | 2813mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.97yd3 | 1.5m3 |
| Bucket Capacity - Struck | 1.71yd3 | 1.3m3 |
| Bucket Width | 8.21ft in | 2500mm |
| Breakout Force | _- | 81.45kN |
06 Dimensions Dimensions
| Ground Clearance | 1.24ft in | 375mm |
|---|---|---|
| Length With Bucket On Ground | 21.84ft in | 6654mm |
| Width Over Tires | 7.4ft in | 2255mm |
| Height To Top Of Cab | 10.08ft in | 3070mm |
| Wheelbase | 8.99ft in | 2740mm |
| Hinge Pin - Max Height | 12ft in | 3655mm |
| Reach At Max Lift And Dump | 3.02ft in | 919mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.