Specification sheet Wheel Loader Ref clark-michigan-45c-wheel-loader
Clark Michigan 45C
The Clark Michigan 45C is a wheel loader with an operating weight of 21,392 lb (9,703.25 kg), a 109 hp engine, and a 1.77 yd³ (1.35 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
21,392lb
9,703.25kg
Engine power
109hp
81.3kW
Net Power Bucket capacity
1.77yd³
1.35m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Clark Michigan 45C sits at the heavy end of its class:
- Operating weight 21,390 lb heavier than 97% (n=374)
- Engine power 109 hp more powerful than 88% (n=367)
- Bucket capacity 1.8 yd³ larger-bucket than 73% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2351 | |
| Engine Model | 6.354.4 | |
| Net Power | 109hp | 81.3kw |
| Gross Power | 116hp | 86.6kw |
| Power Measured @ | 2500rpm | |
| Max Torque | 378lb ft | 512.5Nm |
| Displacement | 354cu in | 5.9L |
| Torque Measured @ | 1400rpm |
02 Operational Specification
| Operating Weight | 21392lb | 9703.3kg |
|---|---|---|
| Fuel Capacity | 39.9gal | 151L |
| Hydraulic System Fluid Capacity | 31.8gal | 120L |
| Engine Oil Fluid Capacity | 3.5gal | 13L |
| Cooling System Fluid Capacity | 9.6gal | 36L |
| Transmission Fluid Capacity | 5gal | 18.9L |
| Front Axle/Diff Fluid Capacity | 3gal | 11L |
| Rear Axle/Diff Fluid Capacity | 3gal | 11L |
| Static Tipping Weight | 12771lb | 5792.9kg |
| Turning Radius | 18.8ft in | 5700mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 18degrees | |
| Tire Size | 17.5-25 |
03 Transmission Specification
| Transmission Type | clark countershaft powershift | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 17.9mph | 28.8km/h |
| Max Speed - Reverse | 17.9mph | 28.8km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2500psi | 17236.9kPa |
|---|---|---|
| Pump Flow Capacity | 33.9gal/min | 128L/min |
| Raise Time | 6sec | |
| Dump Time | 1.5sec | |
| Lower Time | 3.5sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.95ft in | 2725mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.77yd3 | 1.35m3 |
| Bucket Capacity - Struck | 1.48yd3 | 1.13m3 |
| Bucket Width | 8.21ft in | 2500mm |
| Breakout Force | 15152.13lb | 67.41kN |
06 Dimensions Dimensions
| Ground Clearance | 1.25ft in | 380mm |
|---|---|---|
| Length With Bucket On Ground | 21.08ft in | 6425mm |
| Width Over Tires | 7.5ft in | 2283mm |
| Height To Top Of Cab | 10.24ft in | 3120mm |
| Wheelbase | 8.54ft in | 2603mm |
| Hinge Pin - Max Height | 11.65ft in | 3550mm |
| Reach At Max Lift And Dump | 2.94ft in | 894mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.