Specification sheet Wheel Loader Ref clark-michigan-35b-wheel-loader
Clark Michigan 35B
The Clark Michigan 35B is a wheel loader with an operating weight of 14,418.24 lb (6,540 kg), a 74 hp engine, and a 1.31 yd³ (1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
14,418.24lb
6,540kg
Engine power
74hp
55.2kW
Net Power Bucket capacity
1.31yd³
1m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Clark Michigan 35B sits above the median for its class:
- Operating weight 14,420 lb heavier than 64% (n=374)
- Engine power 74 hp more powerful than 53% (n=367)
- Bucket capacity 1.3 yd³ smaller-bucket than 56% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2353 | |
| Engine Model | D500PL | |
| Net Power | 74hp | 55.2kw |
| Gross Power | 84hp | 62.7kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 194.8lb ft | 264Nm |
| Displacement | 303.8cu in | 5L |
| Torque Measured @ | 1600rpm |
02 Operational Specification
| Operating Weight | 14418.3lb | 6540kg |
|---|---|---|
| Fuel Capacity | 25.1gal | 95L |
| Hydraulic System Fluid Capacity | 21.7gal | 82L |
| Engine Oil Fluid Capacity | 3.5gal | 13L |
| Cooling System Fluid Capacity | 7.2gal | 27L |
| Transmission Fluid Capacity | 4.5gal | 17L |
| Front Axle/Diff Fluid Capacity | 3.7gal | 14L |
| Rear Axle/Diff Fluid Capacity | 3.7gal | 14L |
| Static Tipping Weight | 9479.9lb | 4300kg |
| Turning Radius | 16.8ft in | 5100mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 25amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 12.00-24 8PR (L-2) |
03 Transmission Specification
| Transmission Type | countershaft powershift | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 21.2mph | 34km/h |
| Max Speed - Reverse | 21.5mph | 34.5km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2275psi | 15685.6kPa |
|---|---|---|
| Pump Flow Capacity | 32.3gal/min | 122L/min |
| Raise Time | 6sec | |
| Dump Time | 1.1sec | |
| Lower Time | 3.4sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.73ft in | 2660mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.31yd3 | 1m3 |
| Bucket Capacity - Struck | 1.12yd3 | 0.85m3 |
| Bucket Width | 6.96ft in | 2120mm |
| Breakout Force | 10655.95lb | 47.4kN |
06 Dimensions Dimensions
| Ground Clearance | 1.17ft in | 355mm |
|---|---|---|
| Length With Bucket On Ground | 18.02ft in | 5490mm |
| Width Over Tires | 6.67ft in | 2030mm |
| Height To Top Of Cab | 9.5ft in | 2895mm |
| Wheelbase | 7.71ft in | 2350mm |
| Hinge Pin - Max Height | 11.13ft in | 3390mm |
| Reach At Max Lift And Dump | 3.29ft in | 1000mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.