Specification sheet Wheel Loader Ref clark-michigan-275c-wheel-loader
Clark Michigan 275C
The Clark Michigan 275C is a wheel loader with an operating weight of 88,696.39 lb (40,232 kg), a 355.4 hp engine, and a 7.46 yd³ (5.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
88,696.39lb
40,232kg
Engine power
355.4hp
265kW
Net Power Bucket capacity
7.46yd³
5.7m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Clark Michigan 275C sits at the heavy end of its class:
- Operating weight 88,700 lb heavier than 99% (n=198)
- Engine power 355 hp more powerful than 94% (n=190)
- Bucket capacity 7.5 yd³ larger-bucket than 94% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2347 | |
|---|---|---|
| Engine Model | KT 19 C | |
| Net Power | 355.4hp | 265kw |
| Gross Power | 399.7hp | 298kw |
| Max Torque | 1349.8lb ft | 1830Nm |
| Displacement | 1153.4cu in | 18.9L |
02 Operational Specification
| Operating Weight | 88696.4lb | 40232kg |
|---|---|---|
| Fuel Capacity | 165.1gal | 624.6L |
| Hydraulic System Fluid Capacity | 136gal | 514.8L |
| Engine Oil Fluid Capacity | 11gal | 41.6L |
| Cooling System Fluid Capacity | 26gal | 98.4L |
| Transmission Fluid Capacity | 19gal | 71.9L |
| Front Axle/Diff Fluid Capacity | 16gal | 60.5L |
| Rear Axle/Diff Fluid Capacity | 16gal | 60.5L |
| Static Tipping Weight | 58224.1lb | 26410kg |
| Turning Radius | 28.1ft in | 8535mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 100amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 29.5-29 |
03 Transmission Specification
| Transmission Type | Clark countershaft powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.5mph | 34.6km/h |
| Max Speed - Reverse | 21.5mph | 34.6km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2500psi | 17236.9kPa |
|---|---|---|
| Pump Flow Capacity | 117.2gal/min | 443.4L/min |
| Raise Time | 10sec | |
| Dump Time | 2.1sec | |
| Lower Time | 6sec | |
| Pump Type | tandem gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 12.75ft in | 3886mm |
|---|---|---|
| Bucket Capacity - Heaped | 7.46yd3 | 5.7m3 |
| Bucket Capacity - Struck | 6.15yd3 | 4.7m3 |
| Bucket Width | 11.84ft in | 3607mm |
| Breakout Force | _- | 244.6kN |
06 Dimensions Dimensions
| Ground Clearance | 1.87ft in | 567mm |
|---|---|---|
| Length With Bucket On Ground | 34.35ft in | 10467mm |
| Width Over Tires | 11.5ft in | 3505mm |
| Height To Top Of Cab | 12.82ft in | 3907mm |
| Wheelbase | 12.17ft in | 3708mm |
| Hinge Pin - Max Height | 16.8ft in | 5118mm |
| Reach At Max Lift And Dump | 5.59ft in | 1702mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.