Specification sheet Wheel Loader Ref changlin-zl50h-wheel-loader
Changlin ZL50H
The Changlin ZL50H is a wheel loader with an operating weight of 35,935.36 lb (16,300 kg), a 205.2 hp engine, and a 3.93 yd³ (3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
35,935.36lb
16,300kg
Engine power
205.2hp
153kW
Net Power Bucket capacity
3.93yd³
3m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Changlin ZL50H sits above the median for its class:
- Operating weight 35,940 lb heavier than 69% (n=439)
- Engine power 205 hp more powerful than 81% (n=408)
- Bucket capacity 3.9 yd³ larger-bucket than 72% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2347 | |
|---|---|---|
| Engine Model | 6CT8.3 | |
| Net Power | 205.2hp | 153kw |
02 Operational Specification
| Operating Weight | 35935.4lb | 16300kg |
|---|---|---|
| Fuel Capacity | 66.1gal | 250L |
| Tire Size | 23.5-25-16PR |
03 Transmission Specification
| Transmission Type | torque converter | |
|---|---|---|
| Max Speed - Forward | 21.8mph | 35km/h |
| Max Speed - Reverse | 23.7mph | 38km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 10.01ft in | 3050mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.93yd3 | 3m3 |
| Breakout Force | 35969.43lb | 160kN |
05 Dimensions Dimensions
| Ground Clearance | 1.48ft in | 450mm |
|---|---|---|
| Length With Bucket On Ground | 26.96ft in | 8215mm |
| Height To Top Of Cab | 11.62ft in | 3540mm |
| Wheelbase | 11ft in | 3350mm |
| Reach At Max Lift And Dump | 3.91ft in | 1190mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.