Specification sheet Wheel Loader Ref changlin-zl30h-wheel-loader
Changlin ZL30H
The Changlin ZL30H is a wheel loader with an operating weight of 22,487.16 lb (10,200 kg), a 116.7 hp engine, and a 2.23 yd³ (1.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
22,487.16lb
10,200kg
Engine power
116.7hp
87kW
Net Power Bucket capacity
2.23yd³
1.7m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Changlin ZL30H sits at the compact end of its class:
- Operating weight 22,490 lb lighter than 97% (n=439)
- Engine power 117 hp less powerful than 94% (n=408)
- Bucket capacity 2.2 yd³ smaller-bucket than 91% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2301 | |
|---|---|---|
| Engine Model | Cummins 65.9 | |
| Net Power | 116.7hp | 87kw |
02 Operational Specification
| Operating Weight | 22487.2lb | 10200kg |
|---|---|---|
| Fuel Capacity | 34.4gal | 130L |
| Tire Size | 17.5-25-12PR |
03 Transmission Specification
| Transmission Type | torque converter | |
|---|---|---|
| Max Speed - Forward | 21.8mph | 35km/h |
| Max Speed - Reverse | 22.4mph | 36km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 9.36ft in | 2850mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.23yd3 | 1.7m3 |
| Breakout Force | 21581.66lb | 96kN |
05 Dimensions Dimensions
| Ground Clearance | 1.22ft in | 370mm |
|---|---|---|
| Length With Bucket On Ground | 22.52ft in | 6863mm |
| Height To Top Of Cab | 10.24ft in | 3120mm |
| Wheelbase | 9.03ft in | 2750mm |
| Reach At Max Lift And Dump | 3.38ft in | 1030mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.