Specification sheet Wheel Loader Ref caterpillar-r1300g-wheel-loader
Caterpillar R1300G
The Caterpillar R1300G is a wheel loader with an operating weight of 61,178.29 lb (27,750 kg), a 140.9 hp engine, and a 4.06 yd³ (3.1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
61,178.29lb
27,750kg
Engine power
140.9hp
105kW
Net Power Bucket capacity
4.06yd³
3.1m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Caterpillar R1300G sits above the median for its class:
- Operating weight 61,180 lb heavier than 70% (n=198)
- Engine power 141 hp less powerful than 99% (n=190)
- Bucket capacity 4.1 yd³ smaller-bucket than 95% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2236 | |
|---|---|---|
| Engine Model | 3306B DITA | |
| Net Power | 140.9hp | 105kw |
| Gross Power | 165hp | 123kw |
| Power Measured @ | 2200rpm | |
| Displacement | 640.8cu in | 10.5L |
02 Operational Specification
| Operating Weight | 61178.3lb | 27750kg |
|---|---|---|
| Fuel Capacity | 78gal | 295L |
| Hydraulic System Fluid Capacity | 23.3gal | 88L |
| Engine Oil Fluid Capacity | 6.7gal | 25L |
| Cooling System Fluid Capacity | 17.7gal | 67L |
| Transmission Fluid Capacity | 11.9gal | 45L |
| Front Axle/Diff Fluid Capacity | 10.1gal | 38L |
| Rear Axle/Diff Fluid Capacity | 11.1gal | 42L |
| Static Tipping Weight | 45360.2lb | 20575kg |
| Turning Radius | 18.9ft in | 5741mm |
| Rear Axle Oscillation | 20degrees | |
| Tire Size | 17.5x25 20 ply |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 15mph | 24km/h |
| Max Speed - Reverse | 14.3mph | 23km/h |
04 Hydraulic System Specification
| Raise Time | 5sec | |
|---|---|---|
| Dump Time | 2sec | |
| Lower Time | 2.3sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 5.12ft in | 1560mm |
|---|---|---|
| Bucket Capacity - Heaped | 4.06yd3 | 3.1m3 |
| Bucket Width | 7.22ft in | 2200mm |
| Breakout Force | 26504lb | 26504- |
06 Dimensions Dimensions
| Ground Clearance | 1.08ft in | 328mm |
|---|---|---|
| Length With Bucket On Ground | 29.88ft in | 9107mm |
| Width Over Tires | 6.24ft in | 1900mm |
| Height To Top Of Cab | 6.96ft in | 2120mm |
| Wheelbase | 10.01ft in | 3050mm |
| Hinge Pin - Max Height | 9.58ft in | 2918mm |
| Reach At Max Lift And Dump | 5.2ft in | 1583mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.