Caterpillar IT28G
The Caterpillar IT28G is a wheel loader with an operating weight of 26,750.89 lb (12,134 kg), a 2.36 yd³ (1.8 m³) bucket, and a dig depth of 0.36 ft (108 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Caterpillar IT28G sits below the median for its class:
- Operating weight 26,750 lb lighter than 74% (n=439)
- Bucket capacity 2.4 yd³ smaller-bucket than 88% (n=387)
Not positioned on engine power — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Flywheel Horsepower | 143.5hp | 107kw |
|---|---|---|
| Tier Compliant | Tier 2 | |
| Power Measured @ | 2300rpm | |
| Displacement | 366.2cu in | 6L |
| Bore | 4in | 100mm |
| Stroke | 5in | 127mm |
02 Operational Specification
| Operating Weight | 26750.9lb | 12134kg |
|---|---|---|
| Fuel Capacity | 57.1gal | 216L |
| Hydraulic System Fluid Capacity | 33.1gal | 125L |
| Cooling System Fluid Capacity | 11.1gal | 42L |
| Transmission Fluid Capacity | 9.2gal | 34.5L |
| Front Axle/Diff Fluid Capacity | 6.9gal | 26L |
| Rear Axle/Diff Fluid Capacity | 6.7gal | 25L |
| Rear Axle Oscillation | 11degrees |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 37.7mph | 60.7km/h |
| Max Speed - Reverse | 25.8mph | 41.6km/h |
04 Hydraulic System Specification
| Hydraulic System Tank | 18.5gal | 70L |
|---|
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.74ft in | 2967mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.36yd3 | 1.8m3 |
| Bucket Capacity - Struck | 1.97yd3 | 1.5m3 |
| Bucket Width | 8.37ft in | 2549mm |
| Digging Depth | 0.36ft in | 108mm |
| Dumping Angle, Top | 45degrees | |
| Breakout Force | 25340lb | 112.72kN |
06 Dimensions Dimensions
| Ground Clearance | 1.34ft in | 407mm |
|---|---|---|
| Length With Bucket On Ground | 23.81ft in | 7256mm |
| Width Over Tires | 8.33ft in | 2537mm |
| Height To Top Of Cab | 10.73ft in | 3268mm |
| Wheelbase | 9.52ft in | 2900mm |
| Hinge Pin - Max Height | 13.06ft in | 3980mm |
| Reach At Max Lift And Dump | 3.15ft in | 958mm |
| Minimum Turning Radius | 17168.64ft in | 5233m |
| Height Over Rops | 10.73ft in | 3268mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.