Specification sheet Wheel Loader Ref caterpillar-it24f-wheel-loader
Caterpillar IT24F
The Caterpillar IT24F is a wheel loader with an operating weight of 22,021.95 lb (9,988.99 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
22,021.95lb
9,988.99kg
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Caterpillar IT24F sits at the compact end of its class:
- Operating weight 22,020 lb lighter than 100% (n=439)
Not positioned on engine power, bucket capacity — withheld or unpublished for this machine.
01 Engine Specification
| Displacement | 268.5cu in | 4.4L |
|---|---|---|
| Rated Net Power | 105hp | 78.3kw |
02 Operational Specification
| Operating Weight | 22022lb | 9989kg |
|---|
03 Transmission Specification
| Forward - 1 | 4.5mph | 7.1km/h |
|---|---|---|
| Reverse - 1 | 4.5mph | 7.1km/h |
04 Steering Specification
| Minimum Turning Radius - Over Tires | 201in | 5104.9mm |
|---|
05 Transmission Specification
| 2 | 8.2mph | 13.2km/h |
|---|---|---|
| 3 | 14.7mph | 23.6km/h |
| 4 | 23.8mph | 38.3km/h |
06 Axles Specification
| Axle Oscillation | 12degrees |
|---|
07 Operating Specifications Specification
| Articulation Angle | 40degrees |
|---|
08 Service Refill Capacities Specification
| Cooling System | 9.3gal | 35.1L |
|---|---|---|
| Fuel Tank | 41.5gal | 157.1L |
| Crankcase | 2.7gal | 10L |
| Hydraulic Tank | 14gal | 53L |
| Hydraulic System - Including Tank | 20.9gal | 79.1L |
| Transmission | 6.1gal | 23.1L |
| Front | 5.6gal | 21.1L |
| Rear | 5.6gal | 21.1L |
09 Loader Hydraulic System Specification
| Pump Flow - Implement Pump | 39.89 gal/min | |
|---|---|---|
| Raise | 5.3 s | |
| Dump | 1.5 s | |
| Lower, Empty, Float Down | 4.3 s | |
| Total | 11.1 s |
10 Dimensions Dimensions
| Bucket Pin Height - Maximum Lift | 12.36ft in | 3.77m |
|---|---|---|
| Height - Top Of Rops/Fops | 10.28ft in | 3.14m |
| Rack Back Angle - Carry | 45degrees | |
| Wheel Base | 8.86ft in | 2.71m |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.