Specification sheet Wheel Loader Ref caterpillar-982m-wheel-loader
Caterpillar 982M
The Caterpillar 982M is a wheel loader with an operating weight of 78,402 lb (35,562.56 kg), and a 398 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
78,402lb
35,562.56kg
Engine power
398hp
296.8kW
Net Power - Iso 9249 ◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Caterpillar 982M sits at the heavy end of its class:
- Operating weight 78,400 lb heavier than 97% (n=198)
- Engine power 398 hp more powerful than 99% (n=190)
Not positioned on bucket capacity — withheld or unpublished for this machine.
01 Engine Specification
| Displacement | 763cu in | 12.6L |
|---|---|---|
| Net Power - Iso 9249 | 398hp | 296.8kw |
| Engine Model | Cat C13 ACERT | |
| Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes. | |
| Peak Gross Torque - 1,200 Rpm - Sae J1995 | 1627lb ft | 2206Nm |
| Peak Gross Torque - 1,200 Rpm - Iso 14396 | 1609lb ft | 2181.6Nm |
| Maximum Net Power - 1,700 Rpm - Iso 9249 | 398hp | 296.8kw |
| Maximum Net Torque - 1,100 Rpm | 1518lb ft | 2058.2Nm |
| Maximum Power - 1,700 Rpm - Iso 14396 | 430hp | 320.7kw |
| Maximum Power - 1,700 Rpm - Iso 14396 - Metric | 436hp | 325.2kw |
| Maximum Net Power - 1,700 Rpm - Iso 9249 - Metric | 404hp | 301.3kw |
| Maximum Net Power - 1,700 Rpm - Sae J1349 | 398hp | 296.8kw |
| Maximum Net Power - 1,700 Rpm - Sae J1349 - Metric | 404hp | 301.3kw |
| Maximum Power - 1,700 Rpm - Sae J1995 | 436hp | 325.2kw |
| Maximum Power - 1,700 Rpm - Sae J1995 - Metric | 442hp | 329.6kw |
| Maximum Net Torque - 1,000 Rpm | 1505lb ft | 2040.6Nm |
| Maximum Power - 1,800 Rpm - Iso 14396 | 406hp | 302.8kw |
| Maximum Power - 1,800 Rpm - Iso 14396 - Metric | 412hp | 307.3kw |
| Maximum Power - 1,800 Rpm - Sae J1995 | 412hp | 307.3kw |
| Maximum Power - 1,800 Rpm - Sae J1995 - Metric | 417hp | 311kw |
| Peak Gross Torque - 1,300 Rpm - Sae J1995 | 1617lb ft | 2192.4Nm |
| Maximum Net Power - 1,800 Rpm - Iso 9249 | 373hp | 278.2kw |
| Maximum Net Power - 1,800 Rpm - Sae J1349 | 373hp | 278.2kw |
| Maximum Net Power - 1,800 Rpm - Iso 9249 - Metric | 378hp | 281.9kw |
| Maximum Net Power - 1,800 Rpm - Sae J1349 - Metric | 378hp | 281.9kw |
| Peak Gross Torque - 1,300 Rpm - Iso 14396 | 1602lb ft | 2172.1Nm |
| U.S. Epa Tier 4 Final/Eu Stage Iv - Maximum Power - Sae J1995 | 436hp | 325.2kw |
| Tier 2/Stage Ii, Tier 3/Stage Iiia Equivalent: Maximum Power - Sae J1995 | 436hp | 325.2kw |
02 Operational Specification
| Operating Weight | 78402lb | 35562.6kg |
|---|
03 Transmission Specification
| Forward - 1 | 3.9mph | 6.3km/h |
|---|---|---|
| Forward - 2 | 7.4mph | 12km/h |
| Forward - 3 | 13.1mph | 21.1km/h |
| Forward - 4 | 23.3mph | 37.5km/h |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius. | |
| Reverse - 1 | 4.3mph | 7km/h |
| Reverse - 2 | 8.5mph | 13.7km/h |
| Reverse - 3 | 15mph | 24.2km/h |
| Reverse - 4 | 24.5mph | 39.5km/h |
04 Weights Specification
| Operating Weight | 78402lb | 35562.6kg |
|---|---|---|
| Note | Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles, secondary steering, sound suppression, and a 6.1 m3 (8.0 yd3) GP bucket with BOCE. | |
| Note (1) | For 6.1 m3 (8.0 yd3) general purpose buckets with BOCE. | |
| Note (2) | Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound suppression, and a 6.1 m3 (8.0 yd3) general purpose bucket with BOCE. |
05 Buckets Specification
| Bucket Capacities | 4.6-12.0 m (6.0-15.75 yd) |
|---|
06 Axles Specification
| Front | Fixed | |
|---|---|---|
| Rear | Oscillating ?13 degrees | |
| Maximum Single-Wheel Rise And Fall | 22.5in | 570mm |
07 Hydraulic System Specification
| Hydraulic Cycle Time - Total | 10.1 s | |
|---|---|---|
| Implement System - Maximum Operating Pressure | 4975 psi | |
| Implement Pump Type | Variable Displacement Piston | |
| Implement System - Maximum Pump Output At 2,250 Rpm | 119 gal/min | |
| Implement System - Optional 3rd Function Maximum Flow | 63 gal/min | |
| Implement System - Optional 3rd Function Maximum Pressure | 3159 psi | |
| Hydraulic Cycle Time - Rated Payload - Raise From Carry Position | 5.3 s | |
| Hydraulic Cycle Time - Rated Payload - Dump, At Maximum Raise | 1.7 s | |
| Hydraulic Cycle Time - Rated Payload - Lower, Empty, Float Down | 3.1 s | |
| Hydraulic Cycle Time - Rated Payload - Total | 10.1 s |
08 Brakes Specification
| Brakes | Brakes meet ISO 3450:2011 standards |
|---|
09 Operating Specifications Specification
| Note (1) | For a machine configuration as defined under "Weight." | |
|---|---|---|
| Note (2) | Full compliance to ISO 143971:2007 Sections 1 thru 6. | |
| Note | Full compliance to ISO (2007) 143971 Sections 1 thru 6, which requires 2% verification between calculations and testing. | |
| Breakout Force | 58450lb | 26512.5kg |
| Static Tipping Load - Full 40 Degrees Turn - With Tire Deflection | 46473lb | 21079.8kg |
| Static Tipping Load - Full 40 Degrees Turn - No Tire Deflection | 49368lb | 22393kg |
10 Service Refill Capacities Specification
| Cooling System | 14gal | 53L |
|---|---|---|
| Fuel Tank | 112.5gal | 425.9L |
| Crankcase | 9.8gal | 37.1L |
| Def Tank | 5.5gal | 20.9L |
| Hydraulic Tank | 48gal | 181.7L |
| Transmission | 20.3gal | 76.9L |
| Differential - Final Drives - Front | 24.3gal | 92L |
| Differential - Final Drives - Rear | 24.3gal | 92L |
11 Sound Specification
| Note (1) | *Distance of 15 m (49.2 ft), moving forward in second gear ratio. | |
|---|---|---|
| Note (2) | **For machines in European Union countries and in countries that adopt the "EU Directives." | |
| Note (3) | ***European Union Directive "2000/14/EC" as amended by "2005/88/EC." | |
| Note | *Distance of 15 m (49.2 ft), moving forward in second gear ratio. | |
| With Cooling Fan Speed At Maximum Value - Operator Sound Pressure Level (Iso 6396:2008) | 72 dB(A) | |
| With Cooling Fan Speed At Maximum Value - Exterior Sound Power Level (Iso 6395:2008) | 112 dB(A) | |
| With Cooling Fan Speed At Maximum Value - Exterior Sound Pressure Level (Sae J88:2013) | 78 dB(A)* | |
| With Cooling Fan Speed At 70% Of Maximum Value - Operator Sound Pressure Level (Iso 6396:2008)** | 72 dB(A) | |
| With Cooling Fan Speed At 70% Of Maximum Value - Exterior Sound Power Level (Iso 6395:2008)** | 109 LWA*** |
12 Cab Specification
| Rops/Fops | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards |
|---|
13 Bucket Capacities Specification
| Bucket Range | 4.6-12.0 m (6.0-15.75 yd) |
|---|
14 Engine - Tier 3/Stage Iiia Equivalent Specification
| Emissions | Tier 3/Stage IIIA |
|---|
15 Engine - Tier 4 Final/Stage Iv Specification
| Emissions | Tier 4/Stage IV | |
|---|---|---|
| Engine Model | Cat C13 ACERT | |
| Maximum Net Power - 1,700 Rpm - Sae J1349 | 398hp | 296.8kw |
| Peak Gross Torque - 1,200 Rpm - Sae J1995 | 1627lb ft | 2206Nm |
| Bore | 5.2in | 130.1mm |
| Stroke | 6.2in | 157mm |
| Displacement | 763cu in | 12.6L |
| Note (1) | The power ratings apply at the stated speed when tested under the reference conditions for the specified standards. | |
| Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and aftertreatment. | |
| Note (3) | The gross power advertised is with the fan at maximum speed. | |
| Maximum Net Torque - 1,100 Rpm - Sae J1349 | 1518lb ft | 2058.2Nm |
| Maximum Power - 1,700 Rpm - Sae J1995 | 436hp | 325.2kw |
16 Engine - Tier 2/Stage Ii, Tier 3/Stage Iiia Equivalent Specification
| Engine Model | Cat C13 ACERT | |
|---|---|---|
| Maximum Power - 1,800 Rpm - Sae J1995 | 412hp | 307.3kw |
| Maximum Net Power - 1,800 Rpm - Sae J1349 | 373hp | 278.2kw |
| Peak Gross Torque - 1,300 Rpm - Sae J1995 | 1617lb ft | 2192.4Nm |
| Maximum Net Torque - 1,000 Rpm - Sae J1349 | 1505lb ft | 2040.6Nm |
| Bore | 5.2in | 130.1mm |
| Stroke | 6.2in | 157mm |
| Displacement | 763cu in | 12.6L |
| Emissions | Cat engine with ACERT Technology ? meets Tier 2/Stage II, Tier 3/Stage IIIA equivalent emission standards. |
17 Sound - Tier 2/Stage Ii, Tier 3/Stage Iiia Equivalent Specification
| Operator Sound Pressure Level - Iso 6396:2008 | 75 dB(A) | |
|---|---|---|
| Exterior Sound Power Level - Iso 6395:2008* | 112 dB(A) | |
| Exterior Sound Pressure Level - Sae J88:2013** | 78 dB(A) | |
| Note (1) | The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained, or when the doors and/or windows are open for extended periods or in a noisy environment. | |
| Note (2) | *For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value. | |
| Note (3) | **For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum value. |
18 Sound - Tier 4 Final/Stage Iv Specification
| Note (1) | The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained, or when the doors and/or windows are open for extended periods or in a noisy environment. | |
|---|---|---|
| Operator Sound Pressure Level - Iso 6396:2008 | 72 dB(A) | |
| Exterior Sound Power Level - Iso 6395:2008* | 112 dB(A) | |
| Exterior Sound Pressure Level - Sae J88:2013** | 78 dB(A) | |
| Note (2) | *For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value. | |
| Note (3) | **For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum value. |
19 Dimensions - Standard Lift Dimensions
| Ground Clearance | 1.33ft in | 0.41m |
|---|---|---|
| Centerline Of Rear Axle To Edge Of Counterweight | 8.92ft in | 2.72m |
| Centerline Of Rear Axle To Hitch | 6.25ft in | 1.91m |
| Height - Top Of Exhaust Pipe | 12.25ft in | 3.74m |
| Height - Top Of Hood | 10.17ft in | 3.1m |
| Height - Top Of Rops | 12.5ft in | 3.81m |
| Hinge Pin Height At Carry | 2.67ft in | 0.82m |
| Hinge Pin Height At Maximum Lift | 15.5ft in | 4.73m |
| Lift Arm Clearance At Maximum Lift | 12.67ft in | 3.87m |
| Maximum Width Over Tires | 11.5ft in | 3.51m |
| Overall Length - Without Bucket | 28.17ft in | 8.59m |
| Rack Back - Carry Height | 48 degrees | |
| Rack Back - Maximum Lift | 57 degrees | |
| Rack Back At Ground | 42 degrees | |
| Tread Width | 8.33ft in | 2.54m |
| Note | All dimensions are approximate and based on Bridgestone 875/65R29 VLTS L4 radial tires. | |
| Wheel Base | 12.5ft in | 3.81m |
?Questions & answersfrom this machine's data
- How much does a Caterpillar 982M wheel loader weigh?
- A Caterpillar 982M wheel loader has an operating weight of 78,402 lb (35,562.6 kg).
- What engine does a Caterpillar 982M wheel loader have?
- A Caterpillar 982M wheel loader is powered by a Cat C13 ACERT engine producing 398 hp (296.8 kW).
- What is the ground clearance of a Caterpillar 982M wheel loader?
- A Caterpillar 982M wheel loader has a ground clearance of 1.3 ft (0.4 m).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.