Specification sheet Wheel Loader Ref caterpillar-970f-wheel-loader

Caterpillar 970F

The Caterpillar 970F is a wheel loader with an operating weight of 51,259.68 lb (23,251 kg), a 266 hp engine, and a 6.15 yd³ (4.7 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
51,259.68lb
23,251kg
Engine power
266hp
198.36kW
Gross Power
Bucket capacity
6.15yd³
4.7m³

Where it sits in its classpercentile · medium wheel loaders

Among 198 medium wheel loaders (45,000–90,000 lb), the Caterpillar 970F sits below the median for its class:

  • Operating weight 51,260 lb lighter than 64% (n=198)
  • Engine power 266 hp less powerful than 64% (n=190)
  • Bucket capacity 6.2 yd³ larger-bucket than 71% (n=174)

Scale drawingdrawn to scale · mm

3425B476C8675A
Side elevation
3425B2940D
Front elevation

01 Engine Specification

Gross Power 266hp 198.4kw
Displacement 640.8cu in 10.5L
Aspiration Turbocharged
Bore 4.8in 120.7mm
Stroke 6in 152.4mm

02 Operational Specification

Operating Weight 51259.7lb 23251kg
Fuel Capacity 99.6gal 377L
Hydraulic System Fluid Capacity 54.2gal 205L
Cooling System Fluid Capacity 12gal 45.3L
Transmission Fluid Capacity 15.9gal 60L
Front Axle/Diff Fluid Capacity 12.5gal 47L
Rear Axle/Diff Fluid Capacity 12.5gal 47L
Tire Size 26.5-R25 XHA (L-3) radial

03 Transmission Specification

Transmission Type Power shift
Number Of Forward Gears 4
Number Of Reverse Gears 4
Max Speed - Forward 23.2mph 37.4km/h
Max Speed - Reverse 26.5mph 42.7km/h

04 Hydraulic System Specification

Relief Valve Setting 20700 KPA,3000-Psi
Pump Flow Capacity 98.9gal/min 374L/min
Raise Time 6.1sec
Dump Time 1.3sec
Lower Time 2.1sec

05 Bucket Dimensions

Bucket Capacity - Heaped 6.15yd3 4.7m3
Bucket Capacity - Struck 5.12yd3 3.91m3
Bucket Width 10.57ft in 3220mm
Breakout Force 36405lb 161.94kN

06 Dimensions Dimensions

Ground Clearance 1.57ft in 476mm
Length With Bucket On Ground 28.47ft in 8675mm
Width Over Tires 9.65ft in 2940mm
Height To Top Of Cab 11.24ft in 3425mm
Wheelbase 11ft in 3350mm
Hinge Pin - Max Height 14.55ft in 4432mm
Reach At Max Lift And Dump 4.46ft in 1357mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.