Specification sheet Wheel Loader Ref caterpillar-966e-wheel-loader

Caterpillar 966E

The Caterpillar 966E is a wheel loader with an operating weight of 44,551.02 lb (20,208 kg), a 215.91 hp engine, and a 4.71 yd³ (3.6 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
44,551.02lb
20,208kg
Engine power
215.91hp
161kW
Gross Power
Bucket capacity
4.71yd³
3.6m³

Where it sits in its classpercentile · small wheel loaders

Among 439 small wheel loaders (22,000–45,000 lb), the Caterpillar 966E sits at the heavy end of its class:

  • Operating weight 44,550 lb heavier than 99% (n=439)
  • Engine power 216 hp more powerful than 87% (n=408)
  • Bucket capacity 4.7 yd³ larger-bucket than 94% (n=387)

Scale drawingdrawn to scale · mm

3580B501C8203A
Side elevation
3580B2990D
Front elevation

01 Engine Specification

Engine Make 2236
Engine Model 3306
Gross Power 216hp 161kw
Displacement 640.8cu in 10.5L

02 Operational Specification

Operating Weight 44551.1lb 20208kg
Fuel Capacity 80.4gal 304L
Hydraulic System Fluid Capacity 54.2gal 205L
Static Tipping Weight 30547.3lb 13856kg
Turning Radius 23.4ft in 7104mm
Tire Size 26.5-25 14PR

03 Transmission Specification

Number Of Forward Gears 4
Number Of Reverse Gears 4
Max Speed - Forward 23.8mph 38.2km/h
Max Speed - Reverse 27.1mph 43.6km/h

04 Hydraulic System Specification

Raise Time 7.1sec
Dump Time 2sec
Lower Time 2.4sec

05 Bucket Dimensions

Dump Clearance At Max Raise 9.76ft in 2973mm
Bucket Capacity - Heaped 4.71yd3 3.6m3
Bucket Capacity - Struck 4.18yd3 3.19m3
Bucket Width 10.04ft in 3059mm
Breakout Force 41918lb 41918-

06 Dimensions Dimensions

Ground Clearance 1.65ft in 501mm
Length With Bucket On Ground 26.92ft in 8203mm
Width Over Tires 9.81ft in 2990mm
Height To Top Of Cab 11.75ft in 3580mm
Wheelbase 11ft in 3350mm
Hinge Pin - Max Height 1.51ft in 459mm
Reach At Max Lift And Dump 4.22ft in 1285mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.