Specification sheet Wheel Loader Ref caterpillar-950g-wheel-loader
Caterpillar 950G
The Caterpillar 950G is a wheel loader with an operating weight of 39,202.61 lb (17,782 kg), a 197 hp engine, and a 3.48 yd³ (2.66 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
39,202.61lb
17,782kg
Engine power
197hp
147kW
Net Power Bucket capacity
3.48yd³
2.66m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Caterpillar 950G sits above the median for its class:
- Operating weight 39,200 lb heavier than 81% (n=439)
- Engine power 197 hp more powerful than 74% (n=408)
- Bucket capacity 3.5 yd³ larger-bucket than 58% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | 3126DITA | |
|---|---|---|
| Net Power | 197hp | 147kw |
| Gross Power | 180hp | 134.3kw |
| Displacement | 439.4cu in | 7.2L |
| Engine Model | Cat? 3126 DITA | |
| Flywheel Power | 180hp | 134.3kw |
| Maximum Flywheel Power | 197hp | 147kw |
02 Operational Specification
| Operating Weight | 39202.7lb | 17782kg |
|---|---|---|
| Fuel Capacity | 78gal | 295L |
| Hydraulic System Fluid Capacity | 40.5gal | 153L |
| Static Tipping Weight | 26885.4lb | 12195kg |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 23mph | 37km/h |
| Max Speed - Reverse | 25.2mph | 40.5km/h |
| Travel Speed | 23mph | 37.1km/h |
| Forward - 1 | 4.3mph | 7km/h |
| Forward - 2 | 7.9mph | 12.7km/h |
| Forward - 3 | 13.9mph | 22.4km/h |
| Forward - 4 | 23mph | 37km/h |
| Reverse - 1 | 4.8mph | 7.6km/h |
| Reverse - 2 | 8.7mph | 14km/h |
| Reverse - 3 | 15.3mph | 24.5km/h |
| Reverse - 4 | 25.2mph | 40.6km/h |
04 Weights Specification
| Operating Weight | 39200lb | 17780.9kg |
|---|
05 Buckets Specification
| Maximum Bucket Capacity | 4.5yd3 | 3.5m3 |
|---|---|---|
| Bucket Capacities | 2.7-3.5 m3 3.5-4.5 yd3 |
06 Hydraulic System Specification
| Raise Time | 6.3sec | |
|---|---|---|
| Dump Time | 2.2sec | |
| Lower Time | 2.2sec |
07 Axles Specification
| Front | Fixed | |
|---|---|---|
| Rear | Trunnion | |
| Maximum Single-Wheel Rise And Fall | 18.5in | 469.9mm |
08 Hydraulic System Specification
| Hydraulic Cycle Time - Total | 10.7 s | |
|---|---|---|
| Hydraulic Cycle Time - Lower, Empty, Float Down | 2.2 s | |
| Hydraulic Cycle Time - Raise | 6.3 s | |
| Hydraulic Cycle Time - Dump | 2.2 s |
09 Operating Specifications Specification
| Static Tipping Load - Full Turn | 22944lb | 10407.3kg |
|---|---|---|
| Dump Clearance | 9.5ft in | 2.9m |
| Breakout Force | 32810lb | 14882.4kg |
10 Service Refill Capacities Specification
| Cooling System | 13gal | 49L |
|---|---|---|
| Crankcase | 8gal | 30.1L |
| Hydraulic Tank | 23.3gal | 88.1L |
| Hydraulic System - Including Tank | 40.5gal | 153.1L |
| Fuel Tank - Standard | 78gal | 295.3L |
| Transmission | 9gal | 34L |
| Differential - Final Drives - Front | 9.6gal | 36L |
| Differential - Final Drives - Rear | 9.6gal | 36L |
11 Bucket Dimensions
| Dump Clearance At Max Raise | 9.49ft in | 2890mm |
|---|---|---|
| Breakout Force | 32810lb | 32810- |
| Bucket Capacity - Heaped | 3.48yd3 | 2.66m3 |
| Bucket Width | 9.62ft in | 2930mm |
12 Dimensions Dimensions
| Ground Clearance | 1.32ft in | 400mm |
|---|---|---|
| Length With Bucket On Ground | 26.33ft in | 8025mm |
| Width Over Tires | 9.49ft in | 2890mm |
| Height To Top Of Cab | 11.49ft in | 3500mm |
| Reach At Max Lift And Dump | 4.17ft in | 1270mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.