Specification sheet Wheel Loader Ref caterpillar-950e-wheel-loader
Caterpillar 950E
The Caterpillar 950E is a wheel loader with an operating weight of 34,321.57 lb (15,568 kg), a 159.59 hp engine, and a 3.8 yd³ (2.9 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
34,321.57lb
15,568kg
Engine power
159.59hp
119kW
Gross Power Bucket capacity
3.8yd³
2.9m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Caterpillar 950E sits above the median for its class:
- Operating weight 34,320 lb heavier than 64% (n=439)
- Engine power 160 hp less powerful than 56% (n=408)
- Bucket capacity 3.8 yd³ larger-bucket than 70% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2236 | |
|---|---|---|
| Engine Model | 3304 | |
| Gross Power | 159.6hp | 119kw |
| Displacement | 427.2cu in | 7L |
02 Operational Specification
| Operating Weight | 34321.6lb | 15568kg |
|---|---|---|
| Fuel Capacity | 58.7gal | 222L |
| Hydraulic System Fluid Capacity | 40.5gal | 153L |
| Static Tipping Weight | 22566.6lb | 10236kg |
| Turning Radius | 22.7ft in | 6918mm |
| Tire Size | 23.5-25 12PR |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 22.5mph | 36.2km/h |
| Max Speed - Reverse | 24.8mph | 39.9km/h |
04 Hydraulic System Specification
| Raise Time | 6.6sec | |
|---|---|---|
| Dump Time | 2.2sec | |
| Lower Time | 3sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.36ft in | 2852mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.8yd3 | 2.9m3 |
| Bucket Capacity - Struck | 3.26yd3 | 2.5m3 |
| Bucket Width | 9.12ft in | 2777mm |
| Breakout Force | 30150lb | 30150- |
06 Dimensions Dimensions
| Ground Clearance | 1.49ft in | 454mm |
|---|---|---|
| Length With Bucket On Ground | 24.77ft in | 7548mm |
| Width Over Tires | 9.03ft in | 2750mm |
| Height To Top Of Cab | 11.55ft in | 3520mm |
| Wheelbase | 10.44ft in | 3180mm |
| Hinge Pin - Max Height | 12.96ft in | 3950mm |
| Reach At Max Lift And Dump | 3.81ft in | 1160mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.