Specification sheet Wheel Loader Ref caterpillar-950b-wheel-loader
Caterpillar 950B
The Caterpillar 950B is a wheel loader with an operating weight of 32,407.96 lb (14,700 kg), a 156.9 hp engine, and a 3.8 yd³ (2.9 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
32,407.96lb
14,700kg
Engine power
156.9hp
117kW
Net Power Bucket capacity
3.8yd³
2.9m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Caterpillar 950B sits in the middle of its class:
- Operating weight 32,410 lb heavier than 58% (n=439)
- Engine power 157 hp less powerful than 57% (n=408)
- Bucket capacity 3.8 yd³ larger-bucket than 70% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2236 | |
|---|---|---|
| Engine Model | 3304 | |
| Net Power | 156.9hp | 117kw |
| Displacement | 427.2cu in | 7L |
02 Operational Specification
| Operating Weight | 32408lb | 14700kg |
|---|---|---|
| Fuel Capacity | 58.7gal | 222L |
| Hydraulic System Fluid Capacity | 40.5gal | 153L |
| Static Tipping Weight | 22839.9lb | 10360kg |
| Turning Radius | 22.6ft in | 6870mm |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 22.7mph | 36.4km/h |
| Max Speed - Reverse | 24.5mph | 39.4km/h |
04 Hydraulic System Specification
| Raise Time | 6.6sec | |
|---|---|---|
| Dump Time | 2.2sec | |
| Lower Time | 3sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.68ft in | 2950mm |
|---|---|---|
| Breakout Force | _- | 164kN |
| Bucket Capacity - Heaped | 3.8yd3 | 2.9m3 |
| Bucket Capacity - Struck | 2.66yd3 | 2.03m3 |
| Bucket Width | 9.01ft in | 2744mm |
06 Dimensions Dimensions
| Ground Clearance | 1.41ft in | 427mm |
|---|---|---|
| Length With Bucket On Ground | 23.77ft in | 7244mm |
| Width Over Tires | 8.76ft in | 2670mm |
| Height To Top Of Cab | 11.39ft in | 3470mm |
| Wheelbase | 10.44ft in | 3180mm |
| Reach At Max Lift And Dump | 3.42ft in | 1040mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.