Specification sheet Wheel Loader Ref caterpillar-950-wheel-loader
Caterpillar 950
The Caterpillar 950 is a wheel loader with an operating weight of 28,500 lb (12,927.39 kg), a 130 hp engine, and a 2.01 yd³ (1.53 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
28,500lb
12,927.39kg
Engine power
130hp
97kW
Net Power Bucket capacity
2.01yd³
1.53m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Caterpillar 950 sits below the median for its class:
- Operating weight 28,500 lb lighter than 63% (n=439)
- Engine power 130 hp less powerful than 84% (n=408)
- Bucket capacity 2 yd³ smaller-bucket than 95% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2236 | |
|---|---|---|
| Engine Model | 3304T | |
| Net Power | 130hp | 97kw |
| Displacement | 427.2cu in | 7L |
02 Operational Specification
| Operating Weight | 28500lb | 12927.4kg |
|---|---|---|
| Fuel Capacity | 53.1gal | 201L |
| Hydraulic System Fluid Capacity | 41gal | 155L |
| Static Tipping Weight | 21451lb | 9730kg |
| Tire Size | 20.5-25 12PR(L-2) |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 22.4mph | 35.9km/h |
| Max Speed - Reverse | 26.5mph | 42.5km/h |
04 Hydraulic System Specification
| Raise Time | 6.2sec | |
|---|---|---|
| Dump Time | 1.8sec | |
| Lower Time | 3.1sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.26ft in | 2820mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.01yd3 | 1.53m3 |
| Bucket Width | 8.01ft in | 2440mm |
| Breakout Force | 10320lb | 10320- |
06 Dimensions Dimensions
| Ground Clearance | 1.25ft in | 381mm |
|---|---|---|
| Length With Bucket On Ground | 20.25ft in | 6170mm |
| Width Over Tires | 7.91ft in | 2410mm |
| Height To Top Of Cab | 10.9ft in | 3320mm |
| Hinge Pin - Max Height | 12.11ft in | 3690mm |
| Reach At Max Lift And Dump | 2.43ft in | 740mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.