Specification sheet Wheel Loader Ref caterpillar-936e-wheel-loader
Caterpillar 936E
The Caterpillar 936E is a wheel loader with an operating weight of 27,105.84 lb (12,295 kg), a 135.45 hp engine, and a 2.75 yd³ (2.1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
27,105.84lb
12,295kg
Engine power
135.45hp
101kW
Gross Power Bucket capacity
2.75yd³
2.1m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Caterpillar 936E sits below the median for its class:
- Operating weight 27,110 lb lighter than 73% (n=439)
- Engine power 135 hp less powerful than 78% (n=408)
- Bucket capacity 2.8 yd³ smaller-bucket than 70% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2236 | |
|---|---|---|
| Engine Model | 3304 | |
| Gross Power | 135.5hp | 101kw |
| Displacement | 427.2cu in | 7L |
02 Operational Specification
| Operating Weight | 27105.9lb | 12295kg |
|---|---|---|
| Fuel Capacity | 52.9gal | 200L |
| Hydraulic System Fluid Capacity | 38.6gal | 146L |
| Static Tipping Weight | 19846.1lb | 9002kg |
| Turning Radius | 19.6ft in | 5950mm |
| Tire Size | 20.5-25 12PR |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 26mph | 41.8km/h |
| Max Speed - Reverse | 28.6mph | 46km/h |
04 Hydraulic System Specification
| Raise Time | 6.5sec | |
|---|---|---|
| Dump Time | 1.8sec | |
| Lower Time | 3.2sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.45ft in | 2879mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.75yd3 | 2.1m3 |
| Bucket Capacity - Struck | 2.32yd3 | 1.77m3 |
| Bucket Width | 8.75ft in | 2664mm |
| Breakout Force | 28032lb | 28032- |
06 Dimensions Dimensions
| Ground Clearance | 1.29ft in | 392mm |
|---|---|---|
| Length With Bucket On Ground | 23.17ft in | 7060mm |
| Width Over Tires | 8.44ft in | 2570mm |
| Height To Top Of Cab | 11.06ft in | 3370mm |
| Wheelbase | 9.91ft in | 3020mm |
| Hinge Pin - Max Height | 12.6ft in | 3840mm |
| Reach At Max Lift And Dump | 3.19ft in | 970mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.