Specification sheet Wheel Loader Ref caterpillar-930r-wheel-loader
Caterpillar 930R
The Caterpillar 930R is a wheel loader with an operating weight of 21,201.86 lb (9,617 kg), a 100.58 hp engine, and a 2.23 yd³ (1.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
21,201.86lb
9,617kg
Engine power
100.58hp
75kW
Gross Power Bucket capacity
2.23yd³
1.7m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Caterpillar 930R sits at the heavy end of its class:
- Operating weight 21,200 lb heavier than 95% (n=374)
- Engine power 101 hp more powerful than 81% (n=367)
- Bucket capacity 2.2 yd³ larger-bucket than 89% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2236 | |
|---|---|---|
| Engine Model | 3304 | |
| Gross Power | 100.6hp | 75kw |
| Displacement | 427.2cu in | 7L |
02 Operational Specification
| Operating Weight | 21201.9lb | 9617kg |
|---|---|---|
| Fuel Capacity | 39.1gal | 148L |
| Hydraulic System Fluid Capacity | 19.6gal | 74L |
| Static Tipping Weight | 16420.1lb | 7448kg |
| Turning Radius | 19.5ft in | 5943.5mm |
| Tire Size | 17.5-25 12PR |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 19mph | 30.5km/h |
| Max Speed - Reverse | 20.5mph | 32.9km/h |
04 Hydraulic System Specification
| Raise Time | 6.6sec | |
|---|---|---|
| Dump Time | 1.4sec | |
| Lower Time | 3.6sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.16ft in | 2790mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.23yd3 | 1.7m3 |
| Bucket Capacity - Struck | 1.69yd3 | 1.29m3 |
| Bucket Width | 8.01ft in | 2440mm |
| Breakout Force | 17104lb | 17104- |
06 Dimensions Dimensions
| Ground Clearance | 1.15ft in | 348mm |
|---|---|---|
| Length With Bucket On Ground | 20ft in | 6096mm |
| Width Over Tires | 7.68ft in | 2340mm |
| Height To Top Of Cab | 10.31ft in | 3140mm |
| Wheelbase | 9.03ft in | 2750mm |
| Hinge Pin - Max Height | 12.01ft in | 3660mm |
| Reach At Max Lift And Dump | 2.83ft in | 860mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.