Specification sheet Wheel Loader Ref caterpillar-930h-wheel-loader
Caterpillar 930H
The Caterpillar 930H is a wheel loader with an operating weight of 28,725 lb (13,029 kg), a 149 hp engine, and a 2.75 yd³ (2.1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
28,725lb
13,029kg
Engine power
149hp
111kW
Net Power Bucket capacity
2.75yd³
2.1m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Caterpillar 930H sits below the median for its class:
- Operating weight 28,730 lb lighter than 61% (n=439)
- Engine power 149 hp less powerful than 66% (n=408)
- Bucket capacity 2.8 yd³ smaller-bucket than 70% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2236 | |
| Engine Model | C6.6 | |
| Net Power | 149hp | 111kw |
| Power Measured @ | 2300rpm | |
| Max Torque | 536lb ft | 727Nm |
| Displacement | 403cu in | 6.6L |
02 Operational Specification
| Operating Weight | 28725lb | 13029kg |
|---|---|---|
| Fuel Capacity | 59.4gal | 225L |
| Hydraulic System Fluid Capacity | 39gal | 148L |
| Engine Oil Fluid Capacity | 4gal | 15L |
| Cooling System Fluid Capacity | 10.6gal | 40L |
| Transmission Fluid Capacity | 9.1gal | 34.5L |
| Front Axle/Diff Fluid Capacity | 6.9gal | 26L |
| Rear Axle/Diff Fluid Capacity | 6.6gal | 25L |
| Static Tipping Weight | 18321lb | 8310kg |
| Turning Radius | 19.5ft in | 5918mm |
| Tire Size | 20.5 R25 L3 XHA |
03 Transmission Specification
| Transmission Type | Standard Transmission max travel speed | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.8mph | 38.3km/h |
| Max Speed - Reverse | 15mph | 24.1km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3755psi | 25900kPa |
|---|---|---|
| Pump Flow Capacity | 58gal/min | 220L/min |
| Raise Time | 5sec | |
| Dump Time | 1.7sec | |
| Lower Time | 2.8sec | |
| Pump Type | Impement Pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.58ft in | 2927mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.75yd3 | 2.1m3 |
| Bucket Width | 8.4ft in | 2550mm |
| Breakout Force | 30263lb | 13727kN |
06 Dimensions Dimensions
| Ground Clearance | 1.35ft in | 411mm |
|---|---|---|
| Length With Bucket On Ground | 24.75ft in | 7601mm |
| Width Over Tires | 8.5ft in | 2570mm |
| Height To Top Of Cab | 10.75ft in | 3278mm |
| Wheelbase | 9.51ft in | 2900mm |
| Hinge Pin - Max Height | 13.33ft in | 4049mm |
| Reach At Max Lift And Dump | 3.52ft in | 1070mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.