Specification sheet Wheel Loader Ref caterpillar-930g-wheel-loader
Caterpillar 930G
The Caterpillar 930G is a wheel loader with an operating weight of 29,039.29 lb (13,172 kg), and a 150.2 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
29,039.29lb
13,172kg
Engine power
150.2hp
112kW
Net Power ◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Caterpillar 930G sits in the middle of its class:
- Operating weight 29,040 lb lighter than 59% (n=439)
- Engine power 150 hp less powerful than 63% (n=408)
Not positioned on bucket capacity — withheld or unpublished for this machine.
01 Engine Specification
| Number Of Cylinders | 1 | |
|---|---|---|
| Engine Make | Caterpillar | |
| Engine Model | 3056E DIT | |
| Net Power | 150.2hp | 112kw |
| Gross Power | 161hp | 120kw |
| Power Measured @ | 2300rpm | |
| Max Torque | 80 | |
| Displacement | 366.2cu in | 6L |
| Bore | 4in | 100mm |
| Stroke | 5in | 127mm |
02 Operational Specification
| Operating Weight | 29039.3lb | 13172kg |
|---|---|---|
| Fuel Capacity | 59.5gal | 225L |
| Hydraulic System Fluid Capacity | 33.1gal | 125L |
| Cooling System Fluid Capacity | 10.6gal | 40L |
| Transmission Fluid Capacity | 9.2gal | 34.5L |
| Front Axle/Diff Fluid Capacity | 6.9gal | 26L |
| Rear Axle/Diff Fluid Capacity | 6.7gal | 25L |
| Turning Radius | 17.3ft in | 5257mm |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 38mph | 61.2km/h |
| Max Speed - Reverse | 24mph | 38.7km/h |
04 Dimensions Dimensions
| Ground Clearance | 1.39ft in | 421mm |
|---|---|---|
| Length With Bucket On Ground | 25.85ft in | 7877mm |
| Wheelbase | 9.52ft in | 2900mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.