Specification sheet Wheel Loader Ref caterpillar-930-wheel-loader
Caterpillar 930
The Caterpillar 930 is a wheel loader with an operating weight of 21,208.48 lb (9,620 kg), a 100 hp engine, and a 1.7 yd³ (1.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
21,208.48lb
9,620kg
Engine power
100hp
74.6kW
Net Power Bucket capacity
1.7yd³
1.3m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Caterpillar 930 sits at the heavy end of its class:
- Operating weight 21,210 lb heavier than 96% (n=374)
- Engine power 100 hp more powerful than 80% (n=367)
- Bucket capacity 1.7 yd³ larger-bucket than 68% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2236 | |
|---|---|---|
| Engine Model | 3304 | |
| Net Power | 100hp | 74.6kw |
| Displacement | 427.2cu in | 7L |
02 Operational Specification
| Operating Weight | 21208.5lb | 9620kg |
|---|---|---|
| Fuel Capacity | 39.1gal | 148L |
| Hydraulic System Fluid Capacity | 19.6gal | 74L |
| Static Tipping Weight | 15807.2lb | 7170kg |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 27.5mph | 44.2km/h |
| Max Speed - Reverse | 14.5mph | 23.3km/h |
04 Hydraulic System Specification
| Raise Time | 6.4sec | |
|---|---|---|
| Dump Time | 1.8sec | |
| Lower Time | 3.7sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.32ft in | 2840mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.7yd3 | 1.3m3 |
| Bucket Width | 8.01ft in | 2440mm |
| Breakout Force | 19190lb | 19190- |
06 Dimensions Dimensions
| Ground Clearance | 1.15ft in | 348mm |
|---|---|---|
| Length With Bucket On Ground | 19.85ft in | 6050mm |
| Width Over Tires | 7.85ft in | 2390mm |
| Height To Top Of Cab | 10.33ft in | 3148.59mm |
| Hinge Pin - Max Height | 12.67ft in | 3860mm |
| Reach At Max Lift And Dump | 4.43ft in | 1350mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.