Specification sheet Wheel Loader Ref caterpillar-928g-wheel-loader
Caterpillar 928G
The Caterpillar 928G is a wheel loader with an operating weight of 25,699.29 lb (11,657 kg), a 125 hp engine, a 2.23 yd³ (1.7 m³) bucket, and a dig depth of 0.28 ft (86.36 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
25,699.29lb
11,657kg
Engine power
125hp
93.3kW
Net Power Bucket capacity
2.23yd³
1.7m³
Dig depth
0.28ft
86.36mm
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Caterpillar 928G sits below the median for its class:
- Operating weight 25,700 lb lighter than 79% (n=439)
- Engine power 125 hp less powerful than 88% (n=408)
- Bucket capacity 2.2 yd³ smaller-bucket than 91% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | 3116T | |
|---|---|---|
| Net Power | 125hp | 93.3kw |
| Displacement | 366cu in | 6L |
| Bore | 4in | 100.1mm |
| Stroke | 5in | 127mm |
| Rated Net Power | 143hp | 106.7kw |
| Sae J1349 (2) | 155hp | 115.6kw |
| Iso 9249 (1997) (2) | 156hp | 116.4kw |
| Eec 80/1269 (2) | 156hp | 116.4kw |
| Sae J1349 (1) | 143hp | 106.7kw |
| Iso 9249 (1997) (1) | 145hp | 108.2kw |
| Eec 80/1269 (1) | 145hp | 108.2kw |
| Maximum Net Power - 2000 Rpm | 155hp | 115.6kw |
02 Operational Specification
| Operating Weight | 25699.3lb | 11657kg |
|---|---|---|
| Fuel Capacity | 60.8gal | 230L |
| Hydraulic System Fluid Capacity | 33.1gal | 125L |
| Static Tipping Weight | 20350.9lb | 9231kg |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 22.9mph | 36.7km/h |
| Max Speed - Reverse | 15.3mph | 24.6km/h |
| Forward - 1 | 4.9mph | 7.9km/h |
| Reverse - 1 | 4.9mph | 7.9km/h |
04 Steering Specification
| Steering Angle - Each Direction | 40degrees | |
|---|---|---|
| Minimum Turning Radius - Over Tires | 206in | 5232.4mm |
| Steering Cylinder, Two, Bore | 2.8in | 69.9mm |
| Hydraulic Output At 2300 Engine Rpm And 6900 Kpa (1000 Psi) | 27 gal/min | |
| Maximum Working Pressure | 3000 psi |
05 Transmission Specification
| 2 | 7.8mph | 12.6km/h |
|---|---|---|
| 3 | 16mph | 25.8km/h |
| 4 | 23.4mph | 37.7km/h |
06 Weights Specification
| Operating Weight | 27140lb | 12310.5kg |
|---|
07 Tires Specification
| Tread Width | 96ft in | 29.3m |
|---|---|---|
| Size | 17.5-25PR (L-2) |
08 Buckets Specification
| Bucket Capacities | 1.9 m3 - 2.3 m3 2.5 yd3 - 3.0 yd3 |
|---|
09 Hydraulic System Specification
| Raise Time | 6.1sec | |
|---|---|---|
| Dump Time | 1.2sec | |
| Lower Time | 2.8sec |
10 Axles Specification
| Axle Oscillation | 11degrees |
|---|
11 Operating Specifications Specification
| Static Tipping Load - Full Turn | 18018lb | 8172.9kg |
|---|---|---|
| Breakout Force | 25849lb | 11725kg |
| Articulation Angle | 40degrees | |
| Reach - Full Lift And 45 Degrees Dump | 3ft in | 1m |
| Dump Clearance At Full Lift And 45 Degrees Dump Angle | 9.5ft in | 2.9m |
12 Service Refill Capacities Specification
| Cooling System | 11.1gal | 42.1L |
|---|---|---|
| Fuel Tank | 59.4gal | 224.9L |
| Crankcase | 4.2gal | 15.9L |
| Hydraulic Tank | 18.5gal | 70.1L |
| Hydraulic System - Including Tank | 33gal | 125L |
| Transmission | 9.1gal | 34.5L |
| Front | 6.9gal | 26.2L |
| Rear | 6.6gal | 25L |
13 Cab Specification
| Rops | SAE J1040 MAY94, ISO 3471-1994 | |
|---|---|---|
| Fops | SAE J231 JAN81, ISO 3449-1992 Level II |
14 Loader Hydraulic System Specification
| Relief Valve Setting | 3600 psi | |
|---|---|---|
| Pump Flow - Implement Pump | 40.15 gal/min | |
| Output At 2,300 Engine Rpm And 6900 Kpa (1000 Psi) With Sae 10w Oil At 65 Degreesc (150 Degreesf) | 40.3 gal/min | |
| Raise | 6.1 s | |
| Dump | 1.2 s | |
| Lower, Empty, Float Down | 2.8 s | |
| Total | 10.1 s | |
| Bore (1) | 4.8in | 120.7mm |
| Stroke (1) | 27in | 685.8mm |
| Bore (2) | 5in | 127mm |
| Stroke (2) | 21.7in | 551.2mm |
| Hydraulic Cycle Time | 10.1 s |
15 Bucket Dimensions
| Dump Clearance At Max Raise | 9.45ft in | 2879mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.23yd3 | 1.7m3 |
| Breakout Force | 25849lb | 25849- |
| Bucket Width | 8.37ft in | 2549mm |
16 Dimensions Dimensions
| Ground Clearance | 1.4ft in | 426.72mm |
|---|---|---|
| Length With Bucket On Ground | 23.81ft in | 7255mm |
| Width Over Tires | 8.01ft in | 2440mm |
| Height To Top Of Cab | 10.73ft in | 3269mm |
| Reach At Max Lift And Dump | 3.05ft in | 927mm |
| Centerline Of Front Axle To Hitch | 4.91ft in | 1.5m |
| Dump Clearance At Maximum Lift - 45 Degrees | 9.5ft in | 2.9m |
| Carry Height | 3ft in | 0.92m |
| Height - Center Of Axle | 2.3ft in | 0.71m |
| Height - Top Of Exhaust Stack | 10.6ft in | 3.24m |
| Height - Top Of Hood | 87.6in | 2225.04mm |
| Height - Top Of Rops/Fops | 10.8ft in | 3.3m |
| Length - Rear Axle To Bumper | 6.4ft in | 1.96m |
| Bucket Pin Height - Maximum Lift | 12.4ft in | 3.78m |
| Overall Height | 16.4ft in | 4998.72mm |
| Overall Height - Bucket Raised | 16.4ft in | 5m |
| Overall Length | 23.1ft in | 7040.88mm |
| Rack Back Angle - Carry | 47.8degrees | |
| Rack Back Angle - Ground | 44degrees | |
| Rack Back Angle - Maximum Lift | 58degrees | |
| Reach At Maximum Lift And 45 Degrees Dump | 3ft in | 0.92m |
| Wheel Base | 9.6ft in | 2.93m |
| Wheel Base Length | 9.6ft in | 2.93m |
| Width - Over Tires | 77ft in | 23.47m |
| Digging Depth | 3.4in | 86.36mm |
| Bucket Clearance-Maximum Lift/Carry | 12.4ft in | 3.78m |
| Dump Angle At Maximum Lift | 45degrees |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.